Study of cutting force in ultra-precision raster milling of V-groove

被引：0
|
作者：
机构：
[1] [1,To, Suet
[2] Zhang, Guoqing
来源：
Zhang, Guoqing | 1600年 / Springer London卷 / 75期
关键词：
Cutting force plays an important role in the design of cutting plans; setting of cutting conditions; inspection of tool wear; and prediction of machined surface topography. As no previous research has focused on cutting force in ultra-precision raster milling (UPRM); this paper presents a theoretical and experimental study on cutting force modeling in UPRM of V-groove. An analytic cutting force model is established to predict the cutting force components both in the feed direction and thrust direction; and a dynamic model is developed to simulate the free vibration signal induced by the cutting force pulse. The effects of cutting parameters in UPRM are studied; including the depth of cut and feed rate; and a group of experiments conducted to verify the simulation results. The simulation and experimental results show that cutting force in UPRM is figured as a force pulse followed by a free vibration signal induced by the force pulse and that the amplitudes of cutting force in both feed direction and thrust direction increase with the growing depth of cut and feed rate. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：5 / 8
相关论文
共 50 条
  • [31] A theoretical and experimental study of surface generation under spindle vibration in ultra-precision raster milling
    Zhang, S. J.
    To, S.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 75 : 36 - 45
  • [32] Lapping of ultra-precision ball surfaces. Part I. Concentric V-groove lapping system
    Lee, Rong-Tsong
    Hwang, Yih-Chyun
    Chiou, Yuang-Cherng
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (10): : 1146 - 1156
  • [33] An investigation on surface finishing in ultra-precision raster milling of aluminum alloy 6061
    Wang, S. J.
    To, S.
    Chen, X.
    Chen, X. D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (08) : 1289 - 1301
  • [34] The relation between chip morphology and tool wear in ultra-precision raster milling
    Zhang, Guoqing
    To, Suet
    Xiao, Gaobo
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 80-81 : 11 - 17
  • [35] Lapping of ultra-precision ball surfaces. Part II. Eccentric V-groove lapping system
    Lee, Rong-Tsong
    Hwang, Yih-Chyun
    Chiou, Yuang-Cherng
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (10): : 1157 - 1169
  • [36] Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling
    Wei Zhao
    Haitao Wang
    Wei Chen
    The International Journal of Advanced Manufacturing Technology, 2019, 101 : 1133 - 1141
  • [37] Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling
    Zhao, Wei
    Wang, Haitao
    Chen, Wei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (5-8): : 1133 - 1141
  • [38] Cutting force and surface quality in ultra-precision milling of oxygen-free copper under different cutting strategies
    Cui, Zhipeng
    Liu, Hanzhong
    Wu, Liqiang
    Cao, Zhimin
    Zong, Wenjun
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 131 : 2420 - 2442
  • [39] Theoretical and experimental analysis of nano-surface generation in ultra-precision raster milling
    Cheng, M. N.
    Cheung, C. F.
    Lee, W. B.
    To, S.
    Kong, L. B.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (10): : 1090 - 1102
  • [40] Model-based simulation of freeform surface generation in ultra-precision raster milling
    Japan Society of Mechanical Engineers (JSME),; Japan Society of Mechanical Engineers (JSME),; Manufacturing and Machine Tool Division; Manufacturing System Division (Japan Society of Mechanical Engineers):
12345