Study of cutting force in ultra-precision raster milling of V-groove

被引：0
|
作者：
机构：
[1] [1,To, Suet
[2] Zhang, Guoqing
来源：
Zhang, Guoqing | 1600年 / Springer London卷 / 75期
关键词：
Cutting force plays an important role in the design of cutting plans; setting of cutting conditions; inspection of tool wear; and prediction of machined surface topography. As no previous research has focused on cutting force in ultra-precision raster milling (UPRM); this paper presents a theoretical and experimental study on cutting force modeling in UPRM of V-groove. An analytic cutting force model is established to predict the cutting force components both in the feed direction and thrust direction; and a dynamic model is developed to simulate the free vibration signal induced by the cutting force pulse. The effects of cutting parameters in UPRM are studied; including the depth of cut and feed rate; and a group of experiments conducted to verify the simulation results. The simulation and experimental results show that cutting force in UPRM is figured as a force pulse followed by a free vibration signal induced by the force pulse and that the amplitudes of cutting force in both feed direction and thrust direction increase with the growing depth of cut and feed rate. © 2014; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：5 / 8
相关论文
共 50 条
  • [21] The effect of up-cutting and down-cutting directions on materials swelling in ultra-precision raster milling
    Kong, Ming-Chu
    Lee, Wing-Bun
    Cheung, Chi-Fai
    To, Suet
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 697 - +
  • [22] Research on the key technology in ultra-precision machining of optical micro V-groove mold roller
    Zhao, Zhongli
    Yu, Haipeng
    Wu, Daming
    Liu, Ying
    Zheng, Xiuting
    Zhuang, Jian
    Jing, Pengsheng
    ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4, 2013, 712-715 : 1563 - +
  • [23] A study of the cutting-induced heating effect on the machined surface in ultra-precision raster milling of 6061 Al alloy
    Wang, Sujuan
    To, Suet
    Chan, C. Y.
    Cheung, C. F.
    Lee, W. B.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 51 (1-4): : 69 - 78
  • [24] A study of the cutting-induced heating effect on the machined surface in ultra-precision raster milling of 6061 Al alloy
    Sujuan Wang
    Suet To
    C. Y. Chan
    C. F. Cheung
    W. B. Lee
    The International Journal of Advanced Manufacturing Technology, 2010, 51 : 69 - 78
  • [25] Effects of cutting speed on phase changes in ultra-precision raster milling of Zn-Al alloy
    Zhang, S. J.
    To, S.
    Rao, X. X.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2018, 232 (01) : 31 - 41
  • [26] Experimental study on the cutting performance of ultra-precision micro milling machine
    Zhang, Peng
    Lu, Lihua
    Wang, Bo
    Liang, Yingchun
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 2546 - 2549
  • [27] Study on the tool path generation of an automotive headlamp reflector in ultra-precision raster milling
    To, Sandy
    Wang, Hao
    Li, Bing
    Cheung, Chi-Fai
    Wang, Su-Juan
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 673 - +
  • [28] Modelling and simulation of freeform surface generation in ultra-precision raster milling
    Cheung, C. F.
    Kong, L. B.
    Lee, W. B.
    To, S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2006, 220 (11) : 1787 - 1801
  • [29] The effects of spindle vibration on surface generation in ultra-precision raster milling
    Zhang, S. J.
    To, S.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 71 : 52 - 56
  • [30] Case study of surface micro-waves in ultra-precision raster fly cutting
    Zhang, Guoqing
    To, Suet
    Zhang, Shaojian
    Zhu, Zhiwei
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 46 : 393 - 398
12345