Fluxless joining of aluminium alloy to steel by laser irradiation method

被引：13

作者：

Takemoto, Tadashi ^{[1
]}

Kimura, Sachio ^{[2
,3
]}

Kawahito, Yousuke ^{[1
]}

Nishikawa, Hiroshi ^{[1
]}

Katayama, Seiji ^{[1
]}

机构：

[1] Joining and Welding Research Institute, Osaka University, Osaka, Japan

[2] Graduate School of Engineering, Osaka University, Osaka, Japan

[3] Nissan Motor Co. Ltd., Yokosuka, Japan

来源：

Welding International | 2009年 / 23卷 / 05期

关键词：

Joining - Zinc coatings - Irradiation - Filler metals;

D O I：

10.1080/09507110802542643

中图分类号：

学科分类号：

摘要：

A6061 aluminium alloy was joined with steel using Zn filler metal under laser irradiation process. The quality of joint was evaluated by the strength of a lap joint. The effects of laser power irradiation conditions such as travelling speed and defocused distance on the joint strength were investigated. The maximum joint strength was obtained at relatively medium laser travelling speed. The excess reaction between filler metal and aluminium formed thick brittle intermetallic compounds between steel and aluminium alloy. The compounds are considered to lead to the reduction in joint strength. It was found that low wetting at high travelling speed and excess reaction layer formation at low travelling speed were responsible for low joint strength. The study revealed that the relatively high joint strength between aluminium alloy and steel was obtained by laser joining method using Zn filler without the use of flux in air atmosphere.

引用

页码：316 / 322

共 50 条

[31] Clinch-bonded hybrid joining for similar and dissimilar copper alloy, aluminium alloy and galvanised steel sheets
Lei, Lei
He, Xiaocong
Zhao, Desuo
Zhang, Yue
Gu, Fengshou
Ball, Andrew
THIN-WALLED STRUCTURES, 2018, 131 : 393 - 403
[32] TRENDS IN ALUMINIUM ALLOY DEVELOPMENT AND THEIR JOINING METHODS
Rajan, Richard
Kah, Paul
Mvola, Belinga
Martikainen, Jukka
REVIEWS ON ADVANCED MATERIALS SCIENCE, 2016, 44 (04) : 383 - 397
[33] Sheet metal joining and distortion measurement of aluminium alloy and steel in cold wire GTAW process
Kumar, Tinku
Kiran, D., V
Arora, Navneet
MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1865 - 1869
[34] Plastic joining of ultra high strength steel and aluminium alloy sheets by self piercing rivet
Mori, K.
Kato, T.
Abe, Y.
Ravshanbek, Y.
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 283 - 286
[35] Novel method for joining CFRP to aluminium
Moeller, F.
Thomy, C.
Vollertsen, F.
Schiebel, P.
Hoffmeister, C.
Herrmann, A. S.
LASER ASSISTED NET SHAPE ENGINEERING 6, PROCEEDINGS OF THE LANE 2010, PART 2, 2010, 5 : 37 - 45
[36] Spot welding of aluminium clad steel to steel or aluminium: Joining steel to aluminium with an intermediate layer (1st Report)
Weld Int, 7 (530):
[37] Experimental analysis of laser assisted joining of Al-Mg aluminium alloy with Polyetheretherketone (PEEK)
Lambiase, F.
Genna, S.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 84 : 265 - 274
[38] Yb: YAG laser welding of dual phase steel to aluminium alloy
Indhu, R.
Soundarapandian, S.
Vijayaraghavan, L.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 262 : 411 - 421
[39] Joining of Aluminium Alloy Sheets by Rectangular Mechanical Clinching
Abe, Y.
Kato, T.
Mori, K.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS, 2011, 1353 : 1253 - 1258
[40] Effect of laser irradiation on surface hardness and structural parameters of 7178 aluminium alloy
Maryam, Siddra
Bashir, Farooq
MATERIALS RESEARCH EXPRESS, 2018, 5 (04):

← 1 2 3 4 5 →