Plastic joining of ultra high strength steel and aluminium alloy sheets by self piercing rivet

被引：103
|
作者：
Mori, K. [1 ]
Kato, T.
Abe, Y.
Ravshanbek, Y.
机构：
[1] Toyohashi Univ Technol, Dept Prod Syst Engn, Toyohashi, Aichi, Japan
[2] Nippon POP Rivets & Fasteners Ltd, Toyohashi, Aichi, Japan
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2006年 / 55卷 / 01期
关键词：
sheet metal; plastic joining; self piercing rivet;
D O I：
10.1016/S0007-8506(07)60417-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ultra high strength steel and aluminium alloy sheets were plastically joined by a self piercing rivet driven through the upper sheet and spread in the lower sheet with a die. The self piercing rivet directly pierces into the sheets without drilling the sheets beforehand unlike the conventional rivets. Insufficient driving though the upper sheet and fracture of the lower sheet occur due to the high hardness and low ductility of the ultra sheet, respectively. An ultra high strength steel sheet having a tensile strength of 980MPa and an aluminium alloy sheet were successfully joined by optimising shapes of the die.
引用
收藏
页码：283 / 286
页数：4
相关论文
共 50 条
  • [1] Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets
    Kim, W. Y.
    Kim, D. B.
    Park, J. G.
    Kim, D. H.
    Kim, K. H.
    Lee, I. H.
    Cho, H. Y.
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2014, 38 (07) : 735 - 742
  • [2] Joinability of aluminium alloy and mild steel sheets by self piercing rivet
    Abe, Y.
    Kato, T.
    Mori, K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) : 417 - 421
  • [3] Self-piercing riveting of high tensile strength steel and aluminium alloy sheets using conventional rivet and die
    Abe, Y.
    Kato, T.
    Mori, K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) : 3914 - 3922
  • [4] Plastic joining of dissimilar material of high strength steel and aluminum alloy sheets
    Kato, Toru
    Abe, Yohei
    Mori, Ken-Ichiro
    Keikinzoku Yosetsu/Journal of Light Metal Welding and Construction, 2007, 45 (12): : 1 - 8
  • [5] Plastic Joining of Aluminium Alloy Sheets by Aluminium Alloy Cylinder
    Kato, Toru
    Abe, Yohei
    Mori, Ken-ichiro
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 1136 - 1139
  • [6] Developing a self-piercing riveting with flange pipe rivet joining aluminum sheets
    Zhichao Huang
    Qiuhua Yao
    Jiamei Lai
    Jingwei Zhao
    Zhengyi Jiang
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 2315 - 2328
  • [7] Developing a self-piercing riveting with flange pipe rivet joining aluminum sheets
    Huang, Zhichao
    Yao, Qiuhua
    Lai, Jiamei
    Zhao, Jingwei
    Jiang, Zhengyi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (5-8): : 2315 - 2328
  • [8] Joining of high strength steel and aluminium alloy sheets by mechanical clinching with dies for control of metal flow
    Abe, Y.
    Mori, K.
    Kato, T.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (04) : 884 - 889
  • [9] Self-pierce riveting of three high strength steel and aluminium alloy sheets
    Y. Abe
    T. Kato
    K. Mori
    International Journal of Material Forming, 2008, 1 : 1271 - 1274
  • [10] Self-pierce riveting of three high strength steel and aluminium alloy sheets
    Abe, Y.
    Kato, T.
    Mori, K.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 1271 - 1274
12345