Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy

被引：0
|
作者：
Pouranvari, M. [1 ]
Ekrami, A. [1 ]
Kokabi, A.H. [1 ]
机构：
[1] Department of Materials Science and Engineering, Sharif University of Technology, P.O. Box 11365-9466, Tehran, Iran
来源：
Journal of Alloys and Compounds | 2009年 / 469卷 / 1-2期
关键词：
The effect of bonding temperature on microstructure of a transient liquid phase (TLP)-bonded GTD-111 nickel base superalloy; using a Ni-Si-B interlayer; was investigated. At low bonding temperatures microstructure of the joint centerline is controlled by B diffusion. However; at high bonding temperature effect of base metal alloying elements on the joint microstructure development was more pronounced. Effects of bonding temperature on the formation of secondary precipitates in diffusion-affected zone and isothermal solidification time were also analyzed. It was found that above a critical temperature; formation of borides in diffusion-affected zone is suppressed and the time required for isothermal solidification completion is increased. © 2008 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：270 / 275
相关论文
共 50 条
  • [31] The effect of grain boundary on the dissolution of base metal into insert metal during TLP bonding of Ni-base superalloys
    Kim, DU
    Kang, CY
    Lee, WJ
    [J]. METALS AND MATERIALS-KOREA, 1999, 5 (05): : 477 - 484
  • [32] The effect of grain boundary on the dissolution of base metal into insert metal during TLP bonding of Ni-base superalloys
    Central Research Institute, Hyundai Space and Aircraft Co., 8-2 Galhyun-ri, Seongyeon-myun, Seosan 356-850, Korea, Republic of
    不详
    不详
    [J]. Met. Mater. Int., 5 (477-484):
  • [33] The effect of grain boundary on the dissolution of base metal into insert metal during TLP bonding of Ni-base superalloys
    Dae-Up Kim
    Chung-Yun Kang
    Won-Jae Lee
    [J]. Metals and Materials, 1999, 5 : 477 - 484
  • [34] Microstructure and bonding behavior of a new Hf-bearing interlayer alloy for single crystal nickel-base superalloy
    Ruan, ZC
    Wang, SC
    Zheng, YR
    [J]. SCRIPTA MATERIALIA, 1996, 34 (01) : 163 - 168
  • [35] Effect of heterogenization on the microstructure evolution and high temperature deformation behaviour of a nickel base superalloy
    Mahesh, P.
    Kumar, S.S. Satheesh
    Balasundar, I.
    Vanitha, C.
    [J]. Journal of Alloys and Compounds, 2025, 1010
  • [36] Effect of bonding parameters on microstructures and properties during TLP bonding of Ni-based super alloy
    Lin Tie-song
    Li Hai-xin
    He Peng
    Yang Xue
    Huang Yu-dong
    Li Liang
    Han Leng
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (09) : 2112 - 2117
  • [37] Development of measurement and control system for TLP bonding
    Wang, Hong
    Yan, Qian
    Li, Xingeng
    Wang, Xuegang
    Wang, Xiaoming
    Yan, Fengjie
    [J]. EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3, 2011, 317-319 : 1362 - 1367
  • [38] TLP Bonding of DS Ni Base Superalloy, GTD-111 Using Mixed Powder of Base Metal and Filler Metal
    Lee, B. K.
    Han, T. K.
    Song, W. Y.
    Ye, C. H.
    Kang, C. H.
    [J]. THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 894 - 899
  • [39] Microstructure and evolution of a single crystal Nickel-base superalloy during high temperature creep
    Northeatern Univ, Shenyang, China
    [J]. Shiyou Huagong, 9 (3-6):
  • [40] Effect of bonding temperature on isothermal solidification rate during transient liquid phase bonding of Inconel 738LC superalloy
    Idowu, OA
    Richards, NL
    Chaturvedi, MC
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 397 (1-2): : 98 - 112
12345