Effects of loading rate and thickness on mixed-mode I/II fracture toughness of thermoset epoxy resin

被引：0
|
作者：
Department of Mechanical Engineering, Faculty of Engineering, Thammasat University, Pathumthani 12120, Thailand [1 ]
机构：
来源：
Journal of Applied Polymer Science | 2008年 / 109卷 / 04期
关键词：
The influences of loading rate and thickness on fracture behavior and mechanism of thermoset epoxy resin with polyamine hardener under mixed-mode (mode I/II) loading have been studied at low thickness and low loading rate (LTLL); as well as high thickness and high loading rate (HTHL). Under the variation of mixed-mode loading from mode I to mode II; fracture toughness of HTHL specimens were under plane-strain condition. For LTLL specimens; the fracture toughness at dominated mode I loading was under plane-stress condition; whereas those at dominated mode II loading were under plane-strain condition. The stretched zone due to the principal stress in the normal direction to the crack plane as well as shear lips due to the Poisson contraction in the thickness direction were the main characteristic of the fracture surface of LTLL specimen tested at pure mode I loading. On the other hand; the mirror-like fracture surface was observed for the HTHL specimen tested at pure mode I loading. Under pure mode II loading; the aligned stretched zone due to the maximum shear stress was the main characteristic of the fracture surface of LTLL specimen; whereas irregular appearance of the stretched zone was observed for the HTHL specimen. © 2008 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：2408 / 2416
相关论文
共 50 条
  • [41] Mixed-mode fracture toughness versus thickness and yield strength in aluminum alloys
    Seifi, Rahman
    Bahri, Mostafa
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (10)
  • [42] ON THE RELATIONSHIP BETWEEN MODE-I FRACTURE-TOUGHNESS AND SUSCEPTIBILITY TO MIXED-MODE FRACTURE
    MANOHARAN, M
    SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (08): : 1187 - 1192
  • [43] Fracture of a low-carbon steel under mode I, mode II, and mixed-mode loading conditions
    A. P. Soldatenkov
    L. R. Botvina
    M. R. Tyutin
    V. P. Levin
    N. A. Zharkova
    Russian Metallurgy (Metally), 2013, 2013 (10) : 751 - 759
  • [44] MIXED-MODE FRACTURE-TOUGHNESS OF POLYETHYLENE
    MANOHARAN, M
    SCRIPTA METALLURGICA ET MATERIALIA, 1994, 30 (11): : 1383 - 1386
  • [45] Mixed-mode I/II interlaminar fracture toughness of carbon fiber/epoxy composites with the addition of multiwalled carbon nanotubes by spraying technique
    Rodriguez-Gonzalez, J. A.
    Rubio-Gonzalez, C.
    JOURNAL OF COMPOSITE MATERIALS, 2018, 52 (22) : 3045 - 3052
  • [46] Fracture of a Low-Carbon Steel under Mode I, Mode II, and Mixed-Mode Loading Conditions
    Soldatenkov, A. P.
    Botvina, L. R.
    Tyutin, M. R.
    Levin, V. P.
    Zharkova, N. A.
    RUSSIAN METALLURGY, 2013, (10): : 751 - 759
  • [47] Mixed-mode I/II wood fracture characterization using the mixed-mode bending test
    de Moura, M. F. S. F.
    Oliveira, J. M. Q.
    Morais, J. J. L.
    Xavier, J.
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (01) : 144 - 152
  • [48] On the mixed mode I/II/III translaminar fracture toughness of cotton/epoxy laminated composites
    Zeinedini, A.
    Moradi, M. H.
    Taghibeigi, H.
    Jamali, J.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
  • [49] Influence of Bedding Planes on Mode I and Mixed-Mode (I-II) Dynamic Fracture Toughness of Coal: Analysis of Experiments
    Wang, Wei
    Zhao, Yixin
    Teng, Teng
    Zhang, Cun
    Jiao, Zhenhua
    ROCK MECHANICS AND ROCK ENGINEERING, 2021, 54 (01) : 173 - 189
  • [50] INTERLAMINAR FRACTURE-TOUGHNESS OF GRAPHITE EPOXY COMPOSITE UNDER MIXED-MODE DEFORMATIONS
    YOON, SH
    HONG, CS
    EXPERIMENTAL MECHANICS, 1990, 30 (03) : 234 - 239
12345