Effects of loading rate and thickness on mixed-mode I/II fracture toughness of thermoset epoxy resin

被引：0

作者：

Department of Mechanical Engineering, Faculty of Engineering, Thammasat University, Pathumthani 12120, Thailand ^{[1
]}

机构：

来源：

Journal of Applied Polymer Science | 2008年 / 109卷 / 04期

关键词：

The influences of loading rate and thickness on fracture behavior and mechanism of thermoset epoxy resin with polyamine hardener under mixed-mode (mode I/II) loading have been studied at low thickness and low loading rate (LTLL); as well as high thickness and high loading rate (HTHL). Under the variation of mixed-mode loading from mode I to mode II; fracture toughness of HTHL specimens were under plane-strain condition. For LTLL specimens; the fracture toughness at dominated mode I loading was under plane-stress condition; whereas those at dominated mode II loading were under plane-strain condition. The stretched zone due to the principal stress in the normal direction to the crack plane as well as shear lips due to the Poisson contraction in the thickness direction were the main characteristic of the fracture surface of LTLL specimen tested at pure mode I loading. On the other hand; the mirror-like fracture surface was observed for the HTHL specimen tested at pure mode I loading. Under pure mode II loading; the aligned stretched zone due to the maximum shear stress was the main characteristic of the fracture surface of LTLL specimen; whereas irregular appearance of the stretched zone was observed for the HTHL specimen. © 2008 Wiley Periodicals; Inc;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：2408 / 2416

共 50 条

[21] The influence of temperatures on mixed-mode (I plus II) and mode-II fracture toughness of sandstone
Feng, Gan
Kang, Yong
Chen, Feng
Liu, Yi-wei
Wang, Xiao-chuan
ENGINEERING FRACTURE MECHANICS, 2018, 189 : 51 - 63
[22] Mode I, mode II, and mixed-mode I/II interlaminar fracture toughness of GFRP influenced by fiber surface treatment
Rikards, R
Buchholz, FG
Bledzki, AK
Wacker, G
Korjakin, A
MECHANICS OF COMPOSITE MATERIALS, 1996, 32 (05) : 439 - 462
[23] Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rode
Al-Shayea, NA
Khan, K
Abduljauwad, SN
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2000, 37 (04) : 629 - 643
[24] Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites
Low, Kean Ong
Johar, Mahzan
Sung, Aun Naa
Nasir, Mohd Nazri Mohd
Koloor, Seyed Saeid Rahimian
Petru, Michal
Israr, Haris Ahmad
Wong, King Jye
POLYMER TESTING, 2022, 108
[25] Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus
Benzeggagh, ML
Kenane, M
COMPOSITES SCIENCE AND TECHNOLOGY, 1996, 56 (04) : 439 - 449
[26] Determination of mixed-mode I/II fracture toughness and bridging law of composite laminates
Gong, Yu
Zhang, Hexiang
Jiang, Linfei
Ding, Zhaohu
Hu, Ning
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 127
[27] Experimental Study on Mixed-Mode (I-II) Fracture Toughness of Freshwater Ice
Xu, Yaozhong
Zhou, Mao
Yi, Xian
Hua, Wen
Huang, Jiuzhou
Zhang, Wenyu
Dong, Shiming
ACTA MECHANICA SOLIDA SINICA, 2024, 37 (02) : 252 - 264
[28] Rate dependent fracture along a silicon/epoxy interface under mixed-mode loading conditions
Yang, Tianhao
Gandhi, Vatsa
Huang, Rui
Liechti, Kenneth M.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2022, 257
[29] Dynamic mixed-mode I/II delamination fracture and energy release rate of unidirectional graphite/epoxy composites
Wosu, SN
Hui, D
Dutta, PK
ENGINEERING FRACTURE MECHANICS, 2005, 72 (10) : 1531 - 1558
[30] RATE EFFECTS ON MIXED-MODE FRACTURE OF CONCRETE
JOHN, R
SHAH, SP
PROCEEDINGS OF THE 1989 SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS, 1989, : 224 - 230

← 1 2 3 4 5 →