Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy

被引：0
|
作者：
Han J. [1 ,2 ,3 ]
Zhang M. [1 ,2 ,4 ]
Wang B. [4 ]
Guo S. [1 ,2 ]
Jia Y. [1 ,2 ]
Wang T. [1 ,2 ]
机构：
[1] College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan
[2] Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan University of Technology, Taiyuan
[3] Hai’an Industry Institute of Advanced Manufacturing and Intelligent Equipment, Taiyuan University of Technology, Hai’an
[4] Beijing Xinghang Electro-mechanical Co., Ltd., Beijing
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
electrically assisted constitutive equation; electroplastic effect; multi-physical field coupling modeling; titanium alloy;
D O I：
10.3901/JME.2024.09.421
中图分类号：
学科分类号：
摘要：
The electroplastic effect stimulated by pulse current can significantly improve the forming ability of titanium alloys. However, the electroplastic effect is the result of the comprehensive action of “electric-thermal-structural” multi-physical fields, and the construction of an electrically assisted finite element model is of great significance for analyzing the plastic deformation behavior and optimizing the forming process parameters. Conducting electric pulse-assisted stretching experiments on Ti-6Al-4V alloy under different current densities, temperatures, and strain rates. Based on the Johnson-Cook model, a constitutive model considering the thermal and athermal effects is established, with the correlation coefficient R2 higher than 0.95 and the average relative error lower than 2%. Based on this model, the finite element method analyzes the physical field in the process of electric pulse-assisted stretching. When the current density is 4.19 A/mm2, the current density increased by 21.96% compared with the initial value as the specimen stretched to necking, which led to an obvious increase in the temperature gradient in the gauge section, and the temperature difference increased from 68.69 ℃ to 95.52 ℃. Compared with the high-temperature test at the same temperature of 350 ℃, the overall uniformity in the strain field is reduced, and the peak stress is reduced by 49 MPa due to the athermal effect. The stress-strain results predicted by the model show a high fitting accuracy compared to the experimental data. It provides a theoretical method for further study of the electro-assisted forming process and electroplastic effect mechanism. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
下载
收藏
页码：421 / 433
页数：12
相关论文
共 38 条
  • [31] RUDOLF C, GOSWAMI R, KANG W, Et al., Effects of electric current on the plastic deformation behavior of pure copper, iron, and titanium[J], Acta Materialia, 209, (2021)
  • [32] LIU S, KOUADRI-HENNI A, GAVRUS A., Numerical simulation and experimental investigation on the residual stresses in a laser beam welded dual phase DP600 steel plate:Thermo-mechanical material plasticity model, International Journal of Mechanical Sciences, 122, pp. 235-243, (2017)
  • [33] SUNG J H, KIM J H, WAGONER R H., A plastic constitutive equation incorporating strain, strain-rate, and temperature[J], International Journal of Plasticity, 26, 12, pp. 1746-1771, (2010)
  • [34] TRIMBLE D, SHIPLEY H, LEA L, Et al., Constitutive analysis of biomedical grade Co-27Cr-5Mo alloy at high strain rates, Materials Science and Engineering:A, 682, pp. 466-474, (2017)
  • [35] HE An, XIE Ganlin, ZHANG Hailong, Et al., A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel[J], Materials & Design, 52, pp. 677-685, (2013)
  • [36] YAN Minggao, China aviation materials manual, 4, (2001)
  • [37] YAN Lan, JIANG Anna, LI Yaning, Et al., Dynamic constitutive models of Ti-6Al-4V based on isothermal ture stress-strain curves[J], Journal of Materials Research and Technology, 19, pp. 4733-4744, (2022)
  • [38] DONG Guojiang, ZHAO Changcai, PENG Yaxin, Et al., Hot granules medium pressure forming process of AA7075 conical parts[J], Chinese Journal of Mechanical Engineering, 28, 3, pp. 580-591, (2015)
1234