Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy

被引：0
|
作者：
Han J. [1 ,2 ,3 ]
Zhang M. [1 ,2 ,4 ]
Wang B. [4 ]
Guo S. [1 ,2 ]
Jia Y. [1 ,2 ]
Wang T. [1 ,2 ]
机构：
[1] College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan
[2] Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan University of Technology, Taiyuan
[3] Hai’an Industry Institute of Advanced Manufacturing and Intelligent Equipment, Taiyuan University of Technology, Hai’an
[4] Beijing Xinghang Electro-mechanical Co., Ltd., Beijing
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期
关键词：
electrically assisted constitutive equation; electroplastic effect; multi-physical field coupling modeling; titanium alloy;
D O I：
10.3901/JME.2024.09.421
中图分类号：
学科分类号：
摘要：
The electroplastic effect stimulated by pulse current can significantly improve the forming ability of titanium alloys. However, the electroplastic effect is the result of the comprehensive action of “electric-thermal-structural” multi-physical fields, and the construction of an electrically assisted finite element model is of great significance for analyzing the plastic deformation behavior and optimizing the forming process parameters. Conducting electric pulse-assisted stretching experiments on Ti-6Al-4V alloy under different current densities, temperatures, and strain rates. Based on the Johnson-Cook model, a constitutive model considering the thermal and athermal effects is established, with the correlation coefficient R2 higher than 0.95 and the average relative error lower than 2%. Based on this model, the finite element method analyzes the physical field in the process of electric pulse-assisted stretching. When the current density is 4.19 A/mm2, the current density increased by 21.96% compared with the initial value as the specimen stretched to necking, which led to an obvious increase in the temperature gradient in the gauge section, and the temperature difference increased from 68.69 ℃ to 95.52 ℃. Compared with the high-temperature test at the same temperature of 350 ℃, the overall uniformity in the strain field is reduced, and the peak stress is reduced by 49 MPa due to the athermal effect. The stress-strain results predicted by the model show a high fitting accuracy compared to the experimental data. It provides a theoretical method for further study of the electro-assisted forming process and electroplastic effect mechanism. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
下载
收藏
页码：421 / 433
页数：12
相关论文
共 38 条
  • [21] CHEN Guang, KE Zhihong, REN Chengzu, Et al., Constitutive modeling for Ti-6Al-4V alloy machining based on the SHPB tests and simulation[J], Chinese Journal of Mechanical Engineering, 29, 5, pp. 962-970, (2016)
  • [22] SHEIKH-AHMAD J Y, BAILEY J A., A constitutive model for commercially pure titanium, Journal of Engineering Materials and Technology, 117, 2, pp. 139-144, (1995)
  • [23] MAGARGEE J, FAN Rong, CAO Jian, Analysis and observations of current density sensitivity and thermally activated mechanical behavior in electrically-assisted deformation, Journal of Manufacturing Science and Engineering, 135, 6, (2013)
  • [24] PARK E T, LEE B E, KANG D S, Et al., Analytical prediction of flow stress on aluminum alloy /self-reinforced polypropylene laminated sheet material considering temperature-dependent material constants[J], International Journal of Precision Engineering and Manufacturing, 17, pp. 487-493, (2016)
  • [25] PENG Wenwen, ZENG Weidong, WANG Qingjiang, Et al., Comparative study on constitutive relationship of as-cast Ti60 titanium alloy during hot deformation based on Arrhenius-type and artificial neural network models[J], Materials & Design, 51, pp. 95-104, (2013)
  • [26] YUAN Kangbo, YAO Xiaohu, YU Yongqi, Et al., Dynamic thermomechanical response and constitutive modeling of eutectic high-entropy alloy[J], International Journal of Mechanical Sciences, 246, (2023)
  • [27] SEMIATIN S L, BIELER T R., The effect of alpha platelet thickness on plastic flow during hot working of Ti–6Al–4V with a transformed microstructure, Acta Materialia, 49, 17, pp. 3565-3573, (2001)
  • [28] TSKHONDIYA G A., Modeling the effect of multiple pulse treatment on deformation processing[C], Journal of Physics:Conference Series, 181, 1, (2009)
  • [29] PENG Shuhua, Study on constitutive equation of electroplastic, Journal of Plasticity Engineering, 25, 2, pp. 202-206, (2018)
  • [30] TSKHONDIYA G A, BEKLEMISHEV N N., Simulating the effect of a high density electric current pulse on the stress field during plastic deformation[J], International journal of material forming, 5, pp. 157-162, (2012)
1234