Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy

被引：0

作者：

Han J. ^{[1
,2
,3
]}

Zhang M. ^{[1
,2
,4
]}

Wang B. ^{[4
]}

Guo S. ^{[1
,2
]}

Jia Y. ^{[1
,2
]}

Wang T. ^{[1
,2
]}

机构：

[1] College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan

[2] Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan University of Technology, Taiyuan

[3] Hai’an Industry Institute of Advanced Manufacturing and Intelligent Equipment, Taiyuan University of Technology, Hai’an

[4] Beijing Xinghang Electro-mechanical Co., Ltd., Beijing

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 09期

关键词：

electrically assisted constitutive equation; electroplastic effect; multi-physical field coupling modeling; titanium alloy;

D O I：

10.3901/JME.2024.09.421

中图分类号：

学科分类号：

摘要：

The electroplastic effect stimulated by pulse current can significantly improve the forming ability of titanium alloys. However, the electroplastic effect is the result of the comprehensive action of “electric-thermal-structural” multi-physical fields, and the construction of an electrically assisted finite element model is of great significance for analyzing the plastic deformation behavior and optimizing the forming process parameters. Conducting electric pulse-assisted stretching experiments on Ti-6Al-4V alloy under different current densities, temperatures, and strain rates. Based on the Johnson-Cook model, a constitutive model considering the thermal and athermal effects is established, with the correlation coefficient R2 higher than 0.95 and the average relative error lower than 2%. Based on this model, the finite element method analyzes the physical field in the process of electric pulse-assisted stretching. When the current density is 4.19 A/mm2, the current density increased by 21.96% compared with the initial value as the specimen stretched to necking, which led to an obvious increase in the temperature gradient in the gauge section, and the temperature difference increased from 68.69 ℃ to 95.52 ℃. Compared with the high-temperature test at the same temperature of 350 ℃, the overall uniformity in the strain field is reduced, and the peak stress is reduced by 49 MPa due to the athermal effect. The stress-strain results predicted by the model show a high fitting accuracy compared to the experimental data. It provides a theoretical method for further study of the electro-assisted forming process and electroplastic effect mechanism. © 2024 Chinese Mechanical Engineering Society. All rights reserved.

引用

下载

页码：421 / 433

页数：12

共 38 条

[1] PETERS M, KUMPFERT J, WARD C H, Et al., Titanium alloys for aerospace applications[J], Advanced Engineering Materials, 5, 6, pp. 419-427, (2003)
[2] GURRAPPA I., Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications[J], Materials Characterization, 51, 2-3, pp. 131-139, (2003)
[3] GAO Pengfei, FU Mingwang, ZHAN Mei, Et al., Deformation behavior and microstructure evolution of titanium alloys with lamellar microstructure in hot working process: A review[J], Journal of Materials Science & Technology, 39, pp. 56-73, (2020)
[4] HAN Jianchao, YAO Haoming, JIA Yi, Et al., Studying on high temperature plastic deformation behavior and flow softening of novel multiphase TiAl Alloy, Journal of Mechanical Engineering, 58, 16, pp. 77-88, (2022)
[5] SONG Hui, WANG Zhongjin, GAO Tiejun, Effect of high density electropulsing treatment on formability of TC4 titanium alloy sheet[J], Transactions of Nonferrous Metals Society of China, 17, 1, pp. 87-92, (2007)
[6] TROITSKIY O A, STASHENKO V I., Electroplastic wire drawing: A promising method of production of lightweight wire and cable[J], Journal of Machinery Manufacture and Reliability, 44, pp. 758-765, (2015)
[7] REN Zhongkai, GUO Xiongwei, LI Ning, Et al., Study on the modification mechanism of pulse current on the bonding properties of TA1/304 composite plate, Journal of Mechanical Engineering, 58, 6, pp. 62-72, (2022)
[8] XIE Huanyang, DONG Xianghui, AI Zhenqiu, Et al., Experimental investigation on electrically assisted cylindrical deep drawing of AZ31B magnesium alloy sheet[J], The International Journal of Advanced Manufacturing Technology, 86, 1, pp. 1063-1069, (2016)
[9] LI Chao, ZHANG Kaifeng, JIANG Shaosong, Pulse current heating method for light alloy superplastic forming and macroscopic and microscopic effects analysis, Journal of Mechanical Engineering, 47, 18, pp. 43-49, (2011)
[10] JIANG Bo, YANG Wenbing, ZHANG Ziyang, Et al., Numerical simulation and experiment of electrically-assisted incremental forming of thin TC4 titanium alloy sheet, Materials, 13, 6, pp. 1-8, (2020)

← 1 2 3 4 →