Magnetic properties of Fe-based toroidal cores prepared by continuous Joule heating under tensile stress

被引:0
|
作者
Yanai, T. [1 ]
Shimada, A. [1 ]
Takagi, K. [1 ]
Takahashi, K. [1 ]
Nakano, M. [1 ]
Fukunaga, H. [1 ]
Yoshizawa, Y. [2 ]
机构
[1] Faculty of Engineering, Nagasaki University, Nagasaki 852-8521, Japan
[2] Advanced Electronics Research Laboratory, Hitachi Metals Ltd., Kumagaya 360-0843, Japan
来源
Journal of Applied Physics | 2007年 / 101卷 / 09期
关键词
Fe-based toroidal cores with a permeability value of several hundreds were prepared by the continuous Joule heating method under tensile stress at a high moving velocity of 120 cmmin; corresponding to an effective annealing time of approximately 1.8 s; and their magnetic properties were evaluated. The prepared core showed a constant permeability value up to 2 MHz and a low magnetic loss compared with those for conventional cores with controlled permeability. An investigation of dc-bias properties of the core suggested that the core has constant and good magnetic properties below the dc-bias field of 1 kAm which is approximately 50% of the anisotropy field. Consequently; the continuous Joule heating under a tensile stress method at high moving velocity enables us to prepare a long annealed ribbon in a short time with simple equipment and improves productivity for the fabrication process of high performance Fe-based toroidal cores with controlled permeability. © 2007 American Institute of Physics;
D O I
暂无
中图分类号
学科分类号
摘要
Conference article (CA)
引用
下载
收藏
相关论文
共 50 条
  • [41] Magnetic properties of Fe-based nanoparticle assembly
    Gudoshnikov, S
    Liubimov, B
    Matveets, L
    Ranchinski, M
    Usov, N
    Gubin, S
    Yurkov, G
    Snigirev, O
    Volkov, I
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2003, 258 : 54 - 56
  • [42] Magnetic properties, anisotropy, and domain structure of Fe-based nanocrystalline alloy induced by continuous stress-annealing treatment
    Sun, Haibo
    Huan, Haohui
    Wang, Ce
    Zhang, Jichao
    Wang, Jinghui
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2023, 569
  • [43] Magnetic and Structural Properties of Fe-Based Nanoparticles
    Milkovic, O.
    Cesnek, M.
    Gamcova, J.
    Kmjec, T.
    Kohout, J.
    Reiffers, M.
    Varga, R.
    ACTA PHYSICA POLONICA A, 2020, 137 (05) : 723 - 725
  • [44] The Effect of In situ Magnetic Field on Magnetic Properties and Residual Stress of Fe-Based Amorphous Film
    Wang, Sibo
    Kim, Hoe Joon
    Chen, Jun
    Laughlin, David E.
    Piazza, Gianluca
    Zhu, Jingxi
    IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (06)
  • [45] Core Loss in Toroidal Cores Based on Fe-Based Amorphous Metglas 2605HB1 Alloy
    Azuma, Daichi
    Hasegawa, Ryusuke
    IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) : 3460 - 3462
  • [46] Improved soft magnetic properties of Fe-based amorphous powder cores by softening phenolic resin shell
    Li, H. Z.
    He, Z. C.
    Chen, T.
    Yan, A.
    Huang, Z. Y.
    Yan, Y. Q.
    Ke, H. B.
    Wang, W. H.
    Yang, C.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2024, 636
  • [47] Properties of Fe-based nanocrystalline magnetic powder cores (MPC) and structure of particle size distribution (PSD)
    Grybos, Dominik
    Leszczynski, Jacek S.
    Kwiecien, Marcin
    Swieboda, Cezary
    Lasak, Patryk
    Pluta, Wojciech
    Rygal, Roman
    Soinski, Marian
    JOURNAL OF ELECTRICAL ENGINEERING-ELEKTROTECHNICKY CASOPIS, 2018, 69 (02): : 163 - 169
  • [48] Evolution of magnetic domain structure and magnetic properties of Fe-based nanocrystalline powder cores during transverse magnetic field annealing
    Li, Xubin
    Dong, Yaqiang
    Wu, Shouding
    Zhao, Ronglin
    Ding, Qian
    Jia, Xingjie
    He, Aina
    Li, Jiawei
    Liu, Xincai
    ADVANCED POWDER TECHNOLOGY, 2022, 33 (11)
  • [49] Soft magnetic properties of bulk Fe-based amorphous alloys prepared by copper mold casting
    Inoue, Akihisa
    Takeuchi, Akira
    Zhang, Tao
    Murakami, Akira
    Makino, Akihiro
    IEEE Transactions on Magnetics, 1996, 32 (5 pt 2) : 4866 - 4871
  • [50] Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting
    Inoue, A
    Shinohara, Y
    Gook, JS
    MATERIALS TRANSACTIONS JIM, 1995, 36 (12): : 1427 - 1433