Magnetic properties of Fe-based toroidal cores prepared by continuous Joule heating under tensile stress

被引：0
|
作者：
Yanai, T. [1 ]
Shimada, A. [1 ]
Takagi, K. [1 ]
Takahashi, K. [1 ]
Nakano, M. [1 ]
Fukunaga, H. [1 ]
Yoshizawa, Y. [2 ]
机构：
[1] Faculty of Engineering, Nagasaki University, Nagasaki 852-8521, Japan
[2] Advanced Electronics Research Laboratory, Hitachi Metals Ltd., Kumagaya 360-0843, Japan
来源：
Journal of Applied Physics | 2007年 / 101卷 / 09期
关键词：
Fe-based toroidal cores with a permeability value of several hundreds were prepared by the continuous Joule heating method under tensile stress at a high moving velocity of 120 cmmin; corresponding to an effective annealing time of approximately 1.8 s; and their magnetic properties were evaluated. The prepared core showed a constant permeability value up to 2 MHz and a low magnetic loss compared with those for conventional cores with controlled permeability. An investigation of dc-bias properties of the core suggested that the core has constant and good magnetic properties below the dc-bias field of 1 kAm which is approximately 50% of the anisotropy field. Consequently; the continuous Joule heating under a tensile stress method at high moving velocity enables us to prepare a long annealed ribbon in a short time with simple equipment and improves productivity for the fabrication process of high performance Fe-based toroidal cores with controlled permeability. © 2007 American Institute of Physics;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Conference article (CA)
引用
下载
收藏
相关论文
共 50 条
  • [31] Magnetic properties of Fe-based alloys
    Schumann, FO
    Tobin, JG
    JOURNAL OF APPLIED PHYSICS, 2000, 87 (09) : 5460 - 5462
  • [32] Stability of Properties on Magnetic Ribbon and Cores With Domestic Fe-Based Amorphous Alloy for HTS AMDT
    Liu, Daosheng
    Li, Jiachen
    Wang, Shihui
    Yang, Shiyou
    Lin, Yan
    Qi, Zhihai
    Yan, Muqiu
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2019, 29 (02)
  • [33] Magnetic properties of Fe-based amorphous powder cores produced by a hot-pressing method
    Yagi, M
    Endo, I
    Otsuka, I
    Yamamoto, H
    Okuno, R
    Koshimoto, H
    Shintani, A
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2000, 215 : 284 - 287
  • [34] Effects of the Powder Preparation Method on the Magnetic Properties of Fe-based Amorphous Alloy Powder Cores
    Noh, T. H.
    Choi, H. Y.
    JOURNAL OF THE KOREAN MAGNETICS SOCIETY, 2005, 15 (03): : 191 - 197
  • [35] Transformation lines in an Fe-based shape memory alloy under tensile and compressive stress states
    Nishimura, F
    Watanabe, N
    Tanaka, K
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 221 (1-2): : 134 - 142
  • [36] Effects of Phosphating Treatment on the Growth of a Phosphate Layer and the Magnetic Properties of Fe-Based Amorphous Magnetic Powder Cores
    Jiaming Li
    Hongya Yu
    Pan Luo
    Han Yuan
    Zhongwu Liu
    Yu Wang
    Lu Yang
    Wenjie Wu
    Journal of Electronic Materials, 2023, 52 : 5412 - 5421
  • [37] Effects of Phosphating Treatment on the Growth of a Phosphate Layer and the Magnetic Properties of Fe-Based Amorphous Magnetic Powder Cores
    Li, Jiaming
    Yu, Hongya
    Luo, Pan
    Yuan, Han
    Liu, Zhongwu
    Wang, Yu
    Yang, Lu
    Wu, Wenjie
    JOURNAL OF ELECTRONIC MATERIALS, 2023, 52 (08) : 5412 - 5421
  • [38] Effects of particle size and content of silicon resin on the soft magnetic properties of Fe-based magnetic powder cores
    Zhang, Lei
    Yang, Bai
    Cao, Ying
    Yu, Rong-Hai
    Gongneng Cailiao/Journal of Functional Materials, 2014, 45 (06): : 06006 - 06010
  • [39] Piezomagnetic effect of Fe-based amorphous alloy ribbon under continuous compression stress
    Du, Kang
    Zhu, Zheng-Hou
    Zhou, Jia
    Fu, Yuan
    Qiao, Bao-Ying
    Gongneng Cailiao/Journal of Functional Materials, 2013, 44 (17): : 2468 - 2472
  • [40] High density Fe-based soft magnetic composites with nice magnetic properties prepared by warm compaction
    Huang, Haohui
    Zhang, Rui
    Sun, Haibo
    Zhang, Jichao
    Wang, Jinghui
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 947
12345