Morphology and properties of polyamide 6 and polyamide 6-Clay nanocomposites submitted to multiple processing cycles

被引：0
|
作者：
Lin, Jia-Horng [1 ]
Su, Kuan-Hua [1 ]
Lin, Chih-Ching [2 ]
Lou, Ching-Wen [3 ]
机构：
[1] Graduate Institute of Textile Engineering, Feng Chia University, Taichung, Taiwan
[2] Plastics Industry Development Center, Taichung, Taiwan
[3] Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology, Taichung, Taiwan
来源：
Journal of Advanced Materials | 2009年 / 41卷 / 04期
关键词：
In this study; polyamide 6 (PA6) and its nanocomposite were reprocessed by conventional polymer processing techniques to evaluate the feasibility and processability of these materials. The changes in the structure; morphology; tensile properties and color were investigated after each processing cycle. Melt flow index (MFI) results indicated that a reduction in the molecular weight was the predominant reaction in the conditions of this study; but the chemical structure of the neat PA6 and its nanocomposite runchanged in the FTIR spectra. Morphology and tensile properties results showed that multiple processing cycles can gradually improve the delamination and dispersion of the organoclay; and further give rise to higher levels of matrix reinforcement. Besides; it is observed that both the neat PA6 and nanocomposites became progressively yellow after each cycle due to thermo-oxidative degradation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：52 / 64
相关论文
共 50 条
  • [31] Evaluation of Impact Strength of Polyamide 6/Bentonite Clay Nanocomposites
    Paz, Rene Anisio
    Araujo, Edcleide Maria
    Pessan, Luiz Antonio
    Alves Melo, Tomas Jeferson
    Leite, Amanda Damiao
    Medeiros, Vanessa da Nobrega
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2012, 15 (04): : 506 - 509
  • [32] Oxygen barrier and blending properties of blown films of blends of modified polyamide and polyamide-6 clay mineral nanocomposites
    Yeh, Jen-Taut
    Chang, Chang-Jung
    Tsai, Fang-Chang
    Chen, Kan-Nan
    Huang, Kuo-Shien
    APPLIED CLAY SCIENCE, 2009, 45 (1-2) : 1 - 7
  • [33] Mechanical and rheological properties, and morphology of polyamide-6/organoclay/elastomer nanocomposites
    Isik-Gulsac, Isil
    Yilmazer, Ulku
    Bayram, Goknur
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 125 (05) : 4060 - 4073
  • [34] Polyamide 6/Multiwalled Carbon Nanotubes Nanocomposites with Modified Morphology and Thermal Properties
    Mahmood, Nasir
    Islam, Mohammad
    Hameed, Asad
    Saeed, Shaukat
    POLYMERS, 2013, 5 (04) : 1380 - 1391
  • [35] Effects of swelling agents on the crystallization behavior and mechanical properties of polyamide 6/clay nanocomposites
    Ma, CCM
    Kuo, CT
    Kuan, HC
    Chiang, CL
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 88 (07) : 1686 - 1693
  • [36] Investigation of surface properties of plasma-modified polyamide 6 and polyamide 6/layered silicate nanocomposites
    Qi Zhou
    Kean Wang
    Leslie S. Loo
    Journal of Materials Science, 2011, 46 : 3084 - 3093
  • [37] Effect of interfacial interaction on the structure and rheological properties of polyamide-6/clay nanocomposites
    Choi, J. S.
    Lim, S. T.
    Choi, H. J.
    Pozsgay, A.
    Szazdi, L.
    COMPOSITE INTERFACES, 2006, 13 (8-9) : 773 - 782
  • [38] Investigation of surface properties of plasma-modified polyamide 6 and polyamide 6/layered silicate nanocomposites
    Zhou, Qi
    Wang, Kean
    Loo, Leslie S.
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (09) : 3084 - 3093
  • [39] Effects of swelling agents on the crystallization behavior and mechanical properties of polyamide 6/clay nanocomposites
    Ma, C.-C.M. (ccma@che.nthu.edu.tw), 1686, John Wiley and Sons Inc. (88):
  • [40] Effect of clay addition on the morphology and thermal behavior of polyamide 6
    Li, Ting-Cheng
    Ma, Jianhua
    Wang, Min
    Tjiu, Wuiwui Chauhari
    Liu, Tianxi
    Huang, Wei
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 103 (02) : 1191 - 1199
12345