Morphology and properties of polyamide 6 and polyamide 6-Clay nanocomposites submitted to multiple processing cycles

被引：0

作者：

Lin, Jia-Horng ^{[1
]}

Su, Kuan-Hua ^{[1
]}

Lin, Chih-Ching ^{[2
]}

Lou, Ching-Wen ^{[3
]}

机构：

[1] Graduate Institute of Textile Engineering, Feng Chia University, Taichung, Taiwan

[2] Plastics Industry Development Center, Taichung, Taiwan

[3] Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology, Taichung, Taiwan

来源：

Journal of Advanced Materials | 2009年 / 41卷 / 04期

关键词：

In this study; polyamide 6 (PA6) and its nanocomposite were reprocessed by conventional polymer processing techniques to evaluate the feasibility and processability of these materials. The changes in the structure; morphology; tensile properties and color were investigated after each processing cycle. Melt flow index (MFI) results indicated that a reduction in the molecular weight was the predominant reaction in the conditions of this study; but the chemical structure of the neat PA6 and its nanocomposite runchanged in the FTIR spectra. Morphology and tensile properties results showed that multiple processing cycles can gradually improve the delamination and dispersion of the organoclay; and further give rise to higher levels of matrix reinforcement. Besides; it is observed that both the neat PA6 and nanocomposites became progressively yellow after each cycle due to thermo-oxidative degradation;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：52 / 64

共 50 条

[21] Mechanical, thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6 and polyamide-6/clay nanocomposites
Wu, SH
Wang, FY
Ma, CCM
Chang, WC
Kuo, CT
Kuan, HC
Chen, WJ
MATERIALS LETTERS, 2001, 49 (06) : 327 - 333
[22] Polymorphism in polyamide 6 and polyamide 6/clay nanocomposites molded via water-assisted injection molding
Huang, Han-Xiong
Wang, Bin
Zhou, Wei-Wen
COMPOSITES PART B-ENGINEERING, 2012, 43 (03) : 972 - 977
[23] Influence of processing conditions on the optical and crystallographic properties of injection molded polyamide-6 and polyamide-6/montmorillonite nanocomposites
Yebra-Rodriguez, Africa
Alvarez-Lloret, Pedro
Yebra, Ana
Cardell, Carolina
Rodriguez-Navarro, Alejandro B.
APPLIED CLAY SCIENCE, 2011, 51 (04) : 414 - 418
[24] Crystalline properties of injection molded polyamide-6 and polyamide-6/montmorillonite nanocomposites
Yebra-Rodriguez, Africa
Alvarez-Lloret, Pedro
Cardell, Carolina
Rodriguez-Navarro, Alejandro B.
APPLIED CLAY SCIENCE, 2009, 43 (01) : 91 - 97
[25] Morphology and properties of ternary polyamide 6/polyamide 66/elastomer blends
Tomova, D
Radusch, HJ
POLYMERS FOR ADVANCED TECHNOLOGIES, 2003, 14 (01) : 19 - 26
[26] Thermal and dielectric behavior of polyamide-6/clay nanocomposites
Hammami, Imen
Hammami, Helmi
Soulestin, Jeremie
Arous, Mourad
Kallel, Ali
MATERIALS CHEMISTRY AND PHYSICS, 2019, 232 : 99 - 108
[27] Coagulation Bath in The Production of Membranes of Nanocomposites Polyamide 6/Clay
Barbosa Ferreira, Rodholfo Silva
do O Pereira, Caio Henrique
dos Santos Filho, Edson Antonio
Damiao Leite, Amanda Melissa
Araujo, Edcleide Maria
Lira, Helio de Lucena
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2017, 20 : 117 - 125
[28] Flame retardancy of highly filled polyamide 6/clay nanocomposites
Dasari, Aravind
Yu, Zhong-Zhen
Mai, Yiu-Wing
Liu, Songlin
NANOTECHNOLOGY, 2007, 18 (44)
[29] Free volume sizes in intercalated polyamide 6/clay nanocomposites
Winberg, P
Eldrup, M
Pedersen, NJ
van Es, MA
Maurer, FHJ
POLYMER, 2005, 46 (19) : 8239 - 8249
[30] Preparation and Combustion Behavior of Polyamide 6/Polypropylene/Clay Nanocomposites
Qin, Shuhao
Hu, Shijun
Yu, Jie
Luo, Zhu
Guo, Jianbing
Yan, Wei
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2011, 50 (12): : 2243 - 2254

← 1 2 3 4 5 →