Precision cutting of ceramics with milling tool of single crystalline diamond

被引：0

作者：

Suzuki, Hirofumi ^{[1
]}

Okada, Mutsumi ^{[2
]}

Okada, Koichi ^{[3
]}

Ito, Yosuke ^{[3
]}

机构：

[1] Department of Mechanical Engineering, Chubu University, 1200 Matsumoto, Kasugai,Aichi,487-8501, Japan

[2] Chubu University, 1200 Matsumoto, Kasugai,Aichi,487-8501, Japan

[3] NS Tool Co. Ltd, 2-11 Matsuzakataira, Taiwa, Kurokawa,Miyagi,981-3408, Japan

来源：

International Journal of Automation Technology | 2015年 / 9卷 / 01期

关键词：

Ceramic molds - Form accuracy - Micro milling tool - Milling tools - Precision cutting - Rotational speed - Single-crystalline diamond - Tool wear;

D O I：

10.20965/ijat.2015.p0026

中图分类号：

学科分类号：

摘要：

Micro milling tools made of Single Crystalline Diamond (SCD) have been developed to machine micro dies and molds made of ceramics. The milling tools of a cylindrical SCD having many sharp cutting edges are fabricated 3-dimensionally by scanning a laser beam. Flat shape of binder-less tungsten carbide mold was cut with the developed milling tool to evaluate the tool wears and its life. Some micro aspheric molds of tungsten carbide were cut with the milling tool at a rotational speed of 50,000 min−1. The ceramic molds were cut in the ductile mode. By cutting with the milling tool, the form accuracy obtained was about 100 nm P–V and the surface roughness 8 nm Rz. © 2014, Fuji Technology Press. All rights reserved.

引用

页码：26 / 32

共 50 条

[21] Ultra-Precision Cutting of Single Crystal Silicon using Diamond Tool with Large Top Corner Radius
Kobaru, Yuya
Kondo, Eiji
Iwamoto, Ryuichi
EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 : 81 - +
[22] High-speed milling of polybenzimidazole using the fine crystalline diamond coated tool: Effect of sharpening cutting edge and increase of cutting speed on the finished surface
Seimitsu Kogaku Kaishi, 2007, 3 (340-344):
[23] Design and fabrication of nano-scale single crystal diamond cutting tool by focused ion beam (FIB) milling
Baek, Seung-Yub
INTERNATIONAL CONFERENCE ON OPTICAL AND PHOTONIC ENGINEERING (ICOPEN 2015), 2015, 9524
[24] Manufacturing Technology and Application of Single Crystal Diamond Cutting Tool
Yamada H.
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2023, 89 (06): : 426 - 430
[25] Ultra-precision cutting of brittle materials with ultrasonic vibrated diamond tool
Ma, Chunxiang
Shamoto, E.
Xu, Liming
Liu, Nan
Moriwaki, T.
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 169 - +
[26] Nanotwinned diamond cutting tool processed by femtosecond pulsed laser milling with trochoidal trajectory
Jin, Tianye
Chen, Junyun
Zhao, Teng
Zhao, Qingliang
Tian, Yongjun
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 294
[27] INVESTIGATION ON THE CUTTING MODE AND BEHAVIOR OF SINGLE-CRYSTALLINE SILICON UNDER SINGLE-POINT DIAMOND CUTTING
VAHDATI, M
KISHI, K
ICHIDA, Y
INTERNATIONAL JOURNAL OF THE JAPAN SOCIETY FOR PRECISION ENGINEERING, 1995, 29 (02): : 128 - 133
[28] Tool runout and single-edge cutting in micro-milling
Zhang, Xiang
Pan, Xudong
Wang, Guanglin
Zhou, Dong
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4): : 821 - 832
[29] Tool runout and single-edge cutting in micro-milling
Xiang Zhang
Xudong Pan
Guanglin Wang
Dong Zhou
The International Journal of Advanced Manufacturing Technology, 2018, 96 : 821 - 832
[30] Precision cutting characteristics of diamond cutting wheel to woodceramics
Ogawa, K.
Hata, K.
Mayuzumi, M.
Okabe, T.
Ogawa, M.
Otsuka, M.
Transactions of the Materials Research Society of Japan, Vol 30, No 4, 2005, 30 (04): : 1179 - 1182

← 1 2 3 4 5 →