Tool runout and single-edge cutting in micro-milling

被引：10
|
作者：
Zhang, Xiang [1 ]
Pan, Xudong [1 ]
Wang, Guanglin [1 ]
Zhou, Dong [1 ]
机构：
[1] Harbin Inst Technol, Sch Mechatron Engn, Harbin 150001, Heilongjiang, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2018年 / 96卷 / 1-4期
基金：
中国国家自然科学基金;
关键词：
Tool runout; Single edge cutting; Micro-milling; Criterion; END; MODEL; IDENTIFICATION; FORCES;
D O I：
10.1007/s00170-018-1620-y
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Micro-milling is a direct and effective manufacturing method for complex three-dimensional miniaturized parts. Since tool runout has a great influence on micro-milling, this paper proposes a simple and effective method for measuring tool runout parameters. The method was based on the displacement measurement, which obtained the tool runout length and tool runout angle by solving some equations related to the cutter parameters. After analyzing the cutting trajectories of the cutter, a single-edge cutting criterion in micro-milling was proposed. According to the single-edge cutting criterion, the influencing factors of single-edge cutting both in micro-side milling and micro-end milling were analyzed respectively. Finally, the influences of single-edge cutting on micro-milling were analyzed and the single-edge cutting phenomenon was verified by the experiment of cutting forces.
引用
收藏
页码：821 / 832
页数：12
相关论文
共 50 条
  • [1] Tool runout and single-edge cutting in micro-milling
    Xiang Zhang
    Xudong Pan
    Guanglin Wang
    Dong Zhou
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 821 - 832
  • [2] Chip geometry modeling in micro-milling of glow discharge polymer by a single-edge diamond tool considering tool inclination
    Guo, Ruiyang
    Yu, Tianyu
    Zhou, Xingying
    Wang, Guangzhou
    Chen, Mingjun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 320
  • [3] Effects of the Cutting Tool Edge Radius on the Stability Lobes in Micro-milling
    Afazov, Shukri
    Ratchev, Svetan
    Segal, Joel
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 859 - 868
  • [4] Experimental study on tool wear of side cutting edge in micro-milling
    Yang, X. M.
    Cheng, X.
    Wang, F.
    Sun, Q. L.
    Wang, W. H.
    2ND INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND MECHANICAL ENGINEERING (IWMSME2018), 2019, 504
  • [5] In-position measuring of tool runout parameters in micro-milling
    Zhang X.
    Pan X.
    Wang G.
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2021, 42 (02): : 253 - 258
  • [6] Analyzing the Effect of Tool Edge Radius on Cutting Temperature in Micro-milling Process
    Liang, Y. C.
    Yang, K.
    Zheng, K. N.
    Bai, Q. S.
    Chen, W. Q.
    Sun, G. Y.
    5TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: DESIGN, MANUFACTURING, AND TESTING OF MICRO- AND NANO-OPTICAL DEVICES AND SYSTEMS, 2010, 7657
  • [7] An improved cutting force model in micro-milling considering the comprehensive effect of tool runout, size effect, and tool wear
    Liu, Tongshun
    Liu, Yayun
    Zhang, Kedong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (1-2): : 659 - 668
  • [8] Modeling cutting edge degradation by chipping in micro-milling
    Varghese, Alwin
    Kulkarni, Vinay
    Joshi, Suhas S.
    WEAR, 2022, 488
  • [9] An improved cutting force model in micro-milling considering the comprehensive effect of tool runout, size effect, and tool wear
    Tongshun Liu
    Yayun Liu
    Kedong Zhang
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 659 - 668
  • [10] Micro-milling tool wear monitoring under variable cutting parameters and runout using fast cutting force coefficient identification method
    Liu, Tongshun
    Zhu, Kunpeng
    Wang, Gang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (11-12): : 3175 - 3188
12345