Characterization and processing of carbon fiber reinforced PETI-RFI

被引：0
|
作者：
Buckley, Richard [1 ]
Radford, D.W. [1 ]
Stanglmaier, Rudy [1 ]
机构：
[1] Motorsport Engineering Research Center (MERC), Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, United States
来源：
Journal of Advanced Materials | 2008年 / 40卷 / 02期
关键词：
PETI-RFI is a variant of the polymer PETI-5 developed by NASA and viscosity modified for resin transfer holding. The polymer has characteristics of a thermoplastic at low temperature; and high temperature processing results in cross-linking. The cured polymer retains its strength and does not degrade at high-temperature (400C). Previous work with PETI-RFI has focused on compression molding and vacuum assisted compression molding of simple shapes. This paper details the development of a resin-transfer molding process for carbon-fiber reinforced PETI-RFI and the process parameters for removing voids; including injection parameters such as temperature and pressure. Results of Differential Scanning Calorimetry (DSC); Thermo-Gravimetric Analysis (TGA) and optical microscopy are presented. Several processing options for resin-transfer molding are recommended which lead to reduced void content;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：17 / 32
相关论文
共 50 条
  • [31] Laser processing of carbon fiber reinforced plastics release of carbon fiber segments during short-pulsed laser processing of CFRP
    Walter, Juergen
    Brodesser, Alexander
    Hustedt, Michael
    Bluemel, Sven
    Jaeschke, Peter
    Kaierle, Stefan
    LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016, 2016, 83 : 1021 - 1030
  • [32] Processing and characterization of 3D carbon fiber reinforced silicon carbide and silicon nitride matrix composites
    Nakano, K
    Suzuki, K
    Drissi-Habti, M
    Kanno, Y
    CERAMIC MATERIAL SYSTEMS WITH COMPOSITE STRUCTURES: TOWARDS OPTIMUM INTERFACE CONTROL AND DESIGN, 1998, : 157 - 165
  • [33] Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing
    Hmeidat, Nadim S.
    Elkins, Daniel S.
    Peter, Hutchison R.
    Kumar, Vipin
    Compton, Brett G.
    COMPOSITES PART B-ENGINEERING, 2021, 223
  • [34] Processing of a Carbon Fiber Reinforced Polymer (CFRP) laminate part by microwaves
    Barasinski, Anais
    Tertrais, Hermine
    Ghnatios, Chady
    Chinesta, Francisco
    2016 IEEE CONFERENCE ON ELECTROMAGNETIC FIELD COMPUTATION (CEFC), 2016,
  • [35] Processing of Carbon Fiber Fabric Reinforced Polycarbonate - Formation Mechanism of Void -
    Ueda, Hisai
    Okumura, Wataru
    Uematsu, Hideyuki
    Tanoue, Shuichi
    JOURNAL OF FIBER SCIENCE AND TECHNOLOGY, 2016, 72 (12): : 244 - 250
  • [36] Processing and properties of solution impregnated carbon fiber reinforced polyethersulfone composites
    Wu, GM
    Schultz, JM
    POLYMER COMPOSITES, 2000, 21 (02) : 223 - 230
  • [37] Processing and Mode 1 Fracture Toughness of Carbon Fiber Composites Reinforced With Carbon Nanotubes
    Kim, Hansang
    COMPOSITES RESEARCH, 2011, 24 (05): : 39 - 43
  • [38] Absorption behavior analysis of Carbon Fiber Reinforced Polymer in laser processing
    Xu, Hebing
    Hu, Jun
    Yu, Zhou
    OPTICAL MATERIALS EXPRESS, 2015, 5 (10): : 2330 - 2336
  • [39] Radiation processing for carbon fiber-reinforced polytetrafluoroethylene composite materials
    Oshima, A
    Udagawa, A
    Morita, Y
    RADIATION PHYSICS AND CHEMISTRY, 2001, 60 (1-2) : 95 - 100
  • [40] Processing - Interlaminar Shear Strength Relationship of Carbon Fiber Composites Reinforced with Carbon Nanotubes
    Kim, Hansang
    COMPOSITES RESEARCH, 2011, 24 (05): : 34 - 38
12345