Characterization and processing of carbon fiber reinforced PETI-RFI

被引：0
|
作者：
Buckley, Richard [1 ]
Radford, D.W. [1 ]
Stanglmaier, Rudy [1 ]
机构：
[1] Motorsport Engineering Research Center (MERC), Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, United States
来源：
Journal of Advanced Materials | 2008年 / 40卷 / 02期
关键词：
PETI-RFI is a variant of the polymer PETI-5 developed by NASA and viscosity modified for resin transfer holding. The polymer has characteristics of a thermoplastic at low temperature; and high temperature processing results in cross-linking. The cured polymer retains its strength and does not degrade at high-temperature (400C). Previous work with PETI-RFI has focused on compression molding and vacuum assisted compression molding of simple shapes. This paper details the development of a resin-transfer molding process for carbon-fiber reinforced PETI-RFI and the process parameters for removing voids; including injection parameters such as temperature and pressure. Results of Differential Scanning Calorimetry (DSC); Thermo-Gravimetric Analysis (TGA) and optical microscopy are presented. Several processing options for resin-transfer molding are recommended which lead to reduced void content;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：17 / 32
相关论文
共 50 条
  • [21] Characterization of fiber orientation in short fiber reinforced composites with an image processing technique
    Lee, YH
    Lee, SW
    Youn, JR
    Chung, K
    Kang, TJ
    MATERIALS RESEARCH INNOVATIONS, 2002, 6 (02) : 65 - 72
  • [22] Liquid Composite Molding-Processing and Characterization of Fiber-Reinforced Composites Modified with Carbon Nanotubes
    Zeiler, R.
    Khalid, U.
    Kuttner, C.
    Kothmann, M.
    Dijkstra, D. J.
    Fery, A.
    Altstaedt, V.
    PROCEEDINGS OF PPS-29: THE 29TH INTERNATIONAL CONFERENCE OF THE POLYMER - CONFERENCE PAPERS, 2014, 1593 : 503 - 507
  • [23] Processing and Mechanical Characterization of Polymer/Carbon Nanotubes Fiber Reinforced Composites by Innovative Vacuum Infusion Technology
    Ricciardi, M. R.
    Giordano, M.
    Zarrelli, M.
    Langella, A.
    Antonucci, V.
    9TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY: 2020 - SCIENTIFIC AND INDUSTRIAL CHALLENGES, 2013, : 636 - 640
  • [24] Processing and characterization of nanoparticles and carbon nanotube reinforced continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis
    Khosroshahi, Kaveh
    Ghasemi-Nejhad, Mehrdad N.
    MATERIAL TECHNOLOGIES AND APPLICATIONS TO OPTICS, STRUCTURES, COMPONENTS, AND SUB-SYSTEMS IV, 2019, 11101
  • [25] Processing of thermo-structural carbon-fiber reinforced carbon composites
    Pardini, Luiz Claudio
    Goncalves, Adriano
    JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, 2009, 1 (02) : 231 - 241
  • [26] Research and discussion on processing technology of carbon fiber reinforced carbon matrix composites
    Zhai Z.
    Qu Y.
    Zhang Y.
    Wu N.
    Yin M.
    Zhang D.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2022, 39 (05): : 2014 - 2033
  • [27] Characterization of glass fiber-reinforced thermoplastic composites for processing
    Wu, TM
    Chiang, CC
    Chung, CT
    Lee, CB
    Hou, CC
    EVOLVING TECHNOLOGIES FOR THE COMPETITIVE EDGE, BOOKS 1 AND 2, 1997, 42 : 1146 - 1155
  • [28] Processing and characterization of pineapple fiber reinforced recycled polyethylene composites
    Singh, Yashpal
    Kumar, Jayant
    Naik, Tejas Pramod
    Pabla, B. S.
    Singh, Inderdeep
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 2153 - 2157
  • [29] MECHANICAL CHARACTERIZATION OF A HYBRID CARBON NANOTUBE/CARBON FIBER REINFORCED COMPOSITE
    Tehrani, Mehran
    Boroujeni, Ayoub Y.
    Hajj, Ramez
    Al-Haik, Marwan
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 9, 2014,
  • [30] STUDIES ON THE PROCESSING AND CHARACTERIZATION OF FIBER REINFORCED/EPOXY-NANOCLAY
    Mogiligidda, Rajashekar
    Hosur, Mahesh
    PROCEEDINGS OF ASME 2023 AEROSPACE STRUCTURES, STRUCTURAL DYNAMICS, AND MATERIALS CONFERENCE, SSDM2023, 2023,
12345