Characterization and processing of carbon fiber reinforced PETI-RFI

被引：0
|
作者：
Buckley, Richard [1 ]
Radford, D.W. [1 ]
Stanglmaier, Rudy [1 ]
机构：
[1] Motorsport Engineering Research Center (MERC), Department of Mechanical Engineering, Colorado State University, Fort Collins, CO, United States
来源：
Journal of Advanced Materials | 2008年 / 40卷 / 02期
关键词：
PETI-RFI is a variant of the polymer PETI-5 developed by NASA and viscosity modified for resin transfer holding. The polymer has characteristics of a thermoplastic at low temperature; and high temperature processing results in cross-linking. The cured polymer retains its strength and does not degrade at high-temperature (400C). Previous work with PETI-RFI has focused on compression molding and vacuum assisted compression molding of simple shapes. This paper details the development of a resin-transfer molding process for carbon-fiber reinforced PETI-RFI and the process parameters for removing voids; including injection parameters such as temperature and pressure. Results of Differential Scanning Calorimetry (DSC); Thermo-Gravimetric Analysis (TGA) and optical microscopy are presented. Several processing options for resin-transfer molding are recommended which lead to reduced void content;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：17 / 32
相关论文
共 50 条
  • [1] Characterization and processing of carbon fiber reinforced PETI-RFI
    Buckley, Richard
    Radford, D. W.
    Stanglmaier, Rudy
    JOURNAL OF ADVANCED MATERIALS, 2008, 40 (02): : 17 - 32
  • [2] Processing and Characterization of Carbon Fiber Reinforced Ceramic Nanocomposites
    Tai, N.H.
    Lee, K.P.
    Hocheng, H.
    Liu, C.S.
    Key Engineering Materials, 164-165 : 105 - 108
  • [3] Processing and characterization of carbon fiber reinforced ceramic nanocomposites
    Tai, NH
    Lee, KP
    Hocheng, H
    Liu, CS
    HIGH TEMPERATURE CERAMIC MATRIX COMPOSITES III, 1999, 164-1 : 105 - 108
  • [4] Processing and Characterization of Carbon Fiber Reinforced Aluminium 7075
    Deshpande, Madhuri
    Gondil, Ramesh
    Waikar, Rahul
    Murty, S. V. S. Narayan
    Mahata, T. S.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 7115 - 7122
  • [5] Processing and characterization of aligned vapor grown carbon fiber reinforced polypropylene
    Kuriger, RJ
    Alam, MK
    Anderson, DP
    Jacobsen, RL
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (01) : 53 - 62
  • [6] Processing and characterization of carbon fiber/epoxy composites reinforced with graphite nanoplatelets
    Chen, J. Y.
    Cho, J.
    Daniel, I. M.
    INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 11 PT A AND PT B: MICRO AND NANO SYSTEMS, 2008, : 1111 - 1120
  • [7] Characterization of Heat Affected Zone Generation in Laser Processing of Carbon Fiber Reinforced Plastics
    Woo, Seong Cheol
    Wang, Huan
    Kim, Ji Hun
    Kim, Joohan
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024, 25 (12) : 2479 - 2489
  • [8] PROCESSING AND CHARACTERIZATION OF CONTINUOUS CARBON FIBER REINFORCED SILICON OXYCARBIDE CERAMIC MATRIX COMPOSITES
    Song, Haonan
    Saltzman, Derek
    Kapat, Jayanta
    Gou, Jihua
    PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 4, 2021,
  • [9] Processing fiberglass and carbon fiber reinforced phthalonitrile composites
    Smith, MD
    Spencer, BE
    Van Dine, P
    MATERIALS-THE STAR AT CENTER STAGE, 1998, 30 : 138 - 148
  • [10] Processing and characterization of an hybrid fiber reinforced Ni aluminide
    Yu, S
    Elzey, DM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (01): : 67 - 74
12345