Full-scale (industrial) wood floor using welded-through dowels

被引：0
|
作者：
Bocquet, J.-F. [1 ]
Pizzi, A. [1 ]
Resch, L. [1 ]
机构：
[1] ENSTIB-LERMAB, University of Nancy 1, 27 Rue du Merle Blanc, F-88000 Epinal, France
来源：
Journal of Adhesion Science and Technology | 2006年 / 20卷 / 15期
关键词：
High-speed dowel rotation welding was used to fabricate a full-scale suspended floor; an applicable civil-engineering structure; to demonstrate that scaling up of such welding technique was feasible. This was coupled with obtaining a more light-weight floor assembly with equal stiffness by maximizing the rigidity of the suspended floor while minimizing the number of timber planks used to build it; and maintaining its vibration frequency high and its level of vibration low. Several assembly and connection combinations of two and three slats linked through welded wood dowels were tried to determine the mechanical resistance of the cross-over joints that had to be used in the building of the floor. Deformation under 4-point static load of the floor was carried out to determine displacement under load and the floor vibration behaviour was determined by the use of accelerometers. The fundamental first natural frequency measured does satisfy well the requirements specified by Eurocode 5. © VSP 2006;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
页码：1727 / 1739
相关论文
共 50 条
  • [41] Floor and wall pressures in a full-scale corrugated grain bin during unloading
    Thompson, SA
    Galili, N
    Williams, RA
    TRANSACTIONS OF THE ASAE, 1998, 41 (06): : 1799 - 1805
  • [42] Modal testing of a full-scale concrete floor: Test specifics and QA procedures
    Pavic, A
    Reynolds, P
    Waldron, P
    MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS, 1997, : 233 - 240
  • [43] Energy distribution analysis in full-scale open floor plan enclosure fires
    Maluk, Cristian
    Linnan, Benjamin
    Wong, Andy
    Hidalgo, Juan P.
    Torero, Jose L.
    Abecassis-Empis, Cecilia
    Cowlard, Adam
    FIRE SAFETY JOURNAL, 2017, 91 : 422 - 431
  • [44] Analysis and burst-test of a full-scale welded pipeline repair sleeve
    Verley, Richard
    Tveiten, Bard W.
    PROCEEDINGS OF THE SEVENTEENTH (2007) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 1- 4, PROCEEDINGS, 2007, : 3331 - +
  • [45] FATIGUE LIFE CALCULATION AND TESTING OF FULL-SCALE WELDED I-BEAMS
    GLINKA, G
    KRZYZECKI, A
    FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES, 1981, 4 (01): : 35 - 48
  • [46] Full-scale dynamic testing and modal identification of a coupled floor slab system
    Au, S. K.
    Ni, Y. C.
    Zhang, F. L.
    Lam, H. F.
    ENGINEERING STRUCTURES, 2012, 37 : 167 - 178
  • [47] Numerical analysis of full-scale structural fire tests on composite floor systems
    Ma, Chenzhi
    Gernay, Thomas
    FIRE SAFETY JOURNAL, 2024, 146
  • [48] Demonstration of a full-scale plant using an UASB followed by a ceramic MBR for the reclamation of industrial wastewater
    Niwa, Terutake
    Hatamoto, Masashi
    Yamashita, Takuya
    Noguchi, Hiroshi
    Takase, Osamu
    Kekre, Kiran A.
    Ang, Wui Seng
    Tao, Guihe
    Seah, Harry
    Yamaguchi, Takashi
    BIORESOURCE TECHNOLOGY, 2016, 218 : 1 - 8
  • [49] COMBUSTION EXPERIMENTS USING PENTACHLOROPHENOL ON A PILOT SCALE AND FULL-SCALE
    AHLING, B
    JOHANSSON, L
    CHEMOSPHERE, 1977, 6 (07) : 425 - 436
  • [50] Modelling of full-scale industrial rolling and recrystallisation of strips of alloy 3103
    Vatne, HE
    Perocheau, F
    Ekström, HE
    Poizat, L
    Nes, E
    Hagström, J
    Lyttle, M
    Furu, T
    JOURNAL DE PHYSIQUE IV, 2001, 11 (PR4): : 123 - 130
12345