Full-scale (industrial) wood floor using welded-through dowels

被引：0
|
作者：
Bocquet, J.-F. [1 ]
Pizzi, A. [1 ]
Resch, L. [1 ]
机构：
[1] ENSTIB-LERMAB, University of Nancy 1, 27 Rue du Merle Blanc, F-88000 Epinal, France
来源：
Journal of Adhesion Science and Technology | 2006年 / 20卷 / 15期
关键词：
High-speed dowel rotation welding was used to fabricate a full-scale suspended floor; an applicable civil-engineering structure; to demonstrate that scaling up of such welding technique was feasible. This was coupled with obtaining a more light-weight floor assembly with equal stiffness by maximizing the rigidity of the suspended floor while minimizing the number of timber planks used to build it; and maintaining its vibration frequency high and its level of vibration low. Several assembly and connection combinations of two and three slats linked through welded wood dowels were tried to determine the mechanical resistance of the cross-over joints that had to be used in the building of the floor. Deformation under 4-point static load of the floor was carried out to determine displacement under load and the floor vibration behaviour was determined by the use of accelerometers. The fundamental first natural frequency measured does satisfy well the requirements specified by Eurocode 5. © VSP 2006;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
页码：1727 / 1739
相关论文
共 50 条
  • [1] Full-scale (industrial) wood floor using welded-through dowels
    Bocquet, J. -F.
    Pizzi, A.
    Resch, L.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2006, 20 (15) : 1727 - 1739
  • [2] Full-scale industrial wood floor assembly and structures by welded-through dowels
    Bocquet, J. -F.
    Pizzi, A.
    Resch, L.
    HOLZ ALS ROH-UND WERKSTOFF, 2007, 65 (02) : 149 - 155
  • [3] Full-scale industrial wood floor assembly and structures by welded-through dowels Herstellung großformatiger Doppelböden mittels Reibschweißverfahren
    J.-F. Bocquet
    A. Pizzi
    L. Resch
    Holz als Roh- und Werkstoff, 2007, 65 : 149 - 155
  • [4] Experimental study of timber-to-timber composite beam using welded-through wood dowels
    O'Loinsigh, C.
    Oudjene, M.
    Ait-Aider, H.
    Fanning, P.
    Pizzi, A.
    Shotton, E.
    Meghlat, E. -M.
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 36 : 245 - 250
  • [5] Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels
    O'Loinsigh, Cian
    Oudjene, Marc
    Shotton, Elisabeth
    Pizzi, Antonio
    Fanning, Paul
    COMPOSITE STRUCTURES, 2012, 94 (02) : 313 - 321
  • [6] Testing of a Full-Scale Composite Floor Plate
    Lam, Dennis
    Dai, Xianghe
    Sheehan, Therese
    ENGINEERING, 2019, 5 (02) : 223 - 233
  • [7] Full-scale wood architecture as educational tool
    Siem, J.
    Braaten, B. O.
    Gilberg, A.
    STRUCTURES AND ARCHITECTURE: BRIDGING THE GAP AND CROSSING BORDERS, 2019, 1 : 187 - 194
  • [8] Full-scale dynamic testing of raised floor structures
    Kunin, Yuriy
    Faizova, Adelia
    XXI INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCED IN CIVIL ENGINEERING CONSTRUCTION - THE FORMATION OF LIVING ENVIRONMENT (FORM 2018), 2018, 365
  • [9] A Full-Scale Crash Test for a Transmission Wood Pole
    Shi, Haijian
    ELECTRICAL TRANSMISSION AND SUBSTATION STRUCTURES 2018: DEDICATED TO STRENGTHENING OUR CRITICAL INFRASTRUCTURE, 2018, : 176 - 184
  • [10] FATIGUE BEHAVIOR OF FULL-SCALE WELDED BRIDGE ATTACHMENTS.
    Fisher, J.W.
    Barthelemy, B.M.
    Mertz, D.R.
    Edinger, J.A.
    National Cooperative Highway Research Program Report, 1980, (227):
12345