Formation of Mg-Cu-Zn-Y bulk metallic glasses with compressive strength over gigapascal

被引：0
|
作者：
Li, Z.G. [1 ]
Hui, X. [1 ]
Zhang, C.M. [1 ]
Chen, G.L. [1 ]
机构：
[1] State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, 100083, China
来源：
Journal of Alloys and Compounds | 2008年 / 454卷 / 1-2期
关键词：
The Mg55+xCu30-xZn5Y10 bulk metallic glasses (BMGs) with diameter of at least 3 mm were successfully fabricated in compositional range at x = 3-15 by conventional Cu-mold casting method. This kind of BMG alloys have supercooled liquid region (SLR) from 40 to 65 K; γ-value from 0.390 to 0.417; and the reduced glass transformation temperature from 0.543 to 0.576. By increasing the Zn content to 7%; the compressive strength of Mg-based BMG alloy reaches about 1.1 GPa. Vein pattern morphology has been observed in fractured surface of the Mg58Cu25Zn7Y10 alloy. The thermal; mechanical; and acoustic measurements indicate that Mg-Zn-Cu-Y BMGs are intrinsically brittle and are of good GFA. It is suggested that the correlation of elastic constants and mechanical properties of alloys could guide the Mg-based BMGs design. © 2007 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：168 / 173
相关论文
共 50 条
  • [41] Correlation Between Dynamic Compressive Strength and Fracture Behaviors of Bulk Metallic Glasses
    Wenqing Li
    Zhengwang Zhu
    Guojie Li
    Long Zhang
    Zhengkun Li
    Huameng Fu
    Hongwei Zhang
    Hong Li
    Aimin Wang
    Haifeng Zhang
    Acta Metallurgica Sinica (English Letters), 2020, 33 : 1407 - 1415
  • [42] Correlation Between Dynamic Compressive Strength and Fracture Behaviors of Bulk Metallic Glasses
    Li, Wenqing
    Zhu, Zhengwang
    Li, Guojie
    Zhang, Long
    Li, Zhengkun
    Fu, Huameng
    Zhang, Hongwei
    Li, Hong
    Wang, Aimin
    Zhang, Haifeng
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2020, 33 (10) : 1407 - 1415
  • [43] Formation of Cu-Hf-Ti bulk metallic glasses
    Figueroa, I. A.
    Davies, H. A.
    Todd, I.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 434 : 164 - 166
  • [44] Formation of Cu-Hf-Ti bulk metallic glasses
    Figueroa, I.A.
    Davies, H.A.
    Todd, I.
    Journal of Alloys and Compounds, 2007, 434-435 (SPEC. ISS.): : 164 - 166
  • [45] Doubling the Critical Size for Bulk Metallic Glass Formation in the Mg−Cu−Y Ternary System
    H. Ma
    Q. Zheng
    J. Xu
    Y. Li
    E. Ma
    Journal of Materials Research, 2005, 20 (9) : 2252 - 2255
  • [46] Influence of Cu content on the mechanical properties and corrosion resistance of Mg-Zn-Ca bulk metallic glasses
    Zhao, Yan-feng
    Zhu, Jian
    Chang, Li
    Song, Jing-guo
    Chen, Xiao-hua
    Hui, Xi-dong
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2014, 21 (05) : 487 - 493
  • [47] Influence of Cu content on the mechanical properties and corrosion resistance of Mg-Zn-Ca bulk metallic glasses
    Yan-feng Zhao
    Jian Zhu
    Li Chang
    Jing-guo Song
    Xiao-hua Chen
    Xi-dong Hui
    InternationalJournalofMineralsMetallurgyandMaterials, 2014, 21 (05) : 487 - 493
  • [48] Influence of Cu content on the mechanical properties and corrosion resistance of Mg-Zn-Ca bulk metallic glasses
    Yan-feng Zhao
    Jian Zhu
    Li Chang
    Jing-guo Song
    Xiao-hua Chen
    Xi-dong Hui
    International Journal of Minerals, Metallurgy, and Materials, 2014, 21 : 487 - 493
  • [49] Formation and thermal stability of Mg65Cu25Y10 and Mg60Cu30Y10Mg-based metallic glasses
    Li Yesheng
    Wu Ziping
    Dong Dingqian
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 298 - 302
  • [50] Corrosion of, and cellular responses to Mg-Zn-Ca bulk metallic glasses
    Gu, Xuenan
    Zheng, Yufeng
    Zhong, Shengping
    Xi, Tingfei
    Wang, Junqiang
    Wang, Weihua
    BIOMATERIALS, 2010, 31 (06) : 1093 - 1103
12345