Atmospheric air-plasma treatments of polyester textile structures

被引：0
|
作者：
Leroux, F. [1 ]
Perwuelz, A. [1 ]
Campagne, C. [1 ]
Behary, N. [1 ]
机构：
[1] GEMTEX Research Laboratory, Ecole Nationale Supérieure des Arts et Industrie Textiles (ENSAIT), 9 rue de l'Ermitage, F-59070 Roubaix Cedex 1, France
来源：
Journal of Adhesion Science and Technology | 2006年 / 20卷 / 09期
关键词：
The effects of atmospheric air-plasma treatments on woven and non-woven polyester (PET) textile structures were studied by surface analysis methods: wettability and capillarity methods; as well as atomic force microscopy/lateral force microscopy (AFM/LFM). The water contact angle on plasma-treated PET decreased from 80°to 50-40°; indicating an increase in the surface energy of PET fibres due to a change in the fiber surface chemical nature; which was confirmed by a higher fiber friction force measured by the LFM. The extent of water contact angle decrease; as well as the wash fastness of the treatment varied with the structure of the textile. Indeed the more porous the textile structure is (such as a non-woven); the fewer are the chain scissions of the PET at the fiber surface; during the plasma treatment. Thus; the level of surface oxidation and the weak boundary layers formation depend not only on plasma treatment parameters but also on the textile structure. © VSP 2006;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：939 / 957
相关论文
共 50 条
  • [41] Asphaltene Erosion Process in Air Plasma: Emission Spectroscopy and Surface Analysis for Air-Plasma Reactions
    Martinez, H.
    Flores, O.
    Poveda, J. C.
    Campillo, B.
    PLASMA SCIENCE & TECHNOLOGY, 2012, 14 (04) : 303 - 311
  • [42] Surface improvement of cotton/polyester blend textile using DC air glow discharge plasma
    El-Naggar, H., I
    Abd Al-Halim, M. A.
    Gaballa, Akmal S.
    Hassouba, M. A.
    PHYSICA SCRIPTA, 2021, 96 (12)
  • [43] Influence of atmospheric-air plasma on the coating of a nonionic lubricating agent on polyester fiber
    Parvinzadeh, Mazeyar
    Ebrahimi, Izadyar
    RADIATION EFFECTS AND DEFECTS IN SOLIDS, 2011, 166 (06): : 408 - 416
  • [44] Surface Processing of Polyester Canvas using Atmospheric Pressure Air Glow Discharge Plasma
    Liu, Wenzheng
    Chen, Xiaozhong
    Lei, Xiao
    Bian, Huanhuan
    Wang, Yiqing
    PLASMA CHEMISTRY AND PLASMA PROCESSING, 2017, 37 (02) : 465 - 474
  • [45] Surface Processing of Polyester Canvas using Atmospheric Pressure Air Glow Discharge Plasma
    Wenzheng Liu
    Xiaozhong Chen
    Xiao Lei
    Huanhuan Bian
    Yiqing Wang
    Plasma Chemistry and Plasma Processing, 2017, 37 : 465 - 474
  • [46] Atmospheric-air plasma enhances coating of different lubricating agents on polyester fiber
    Ebrahimi, I.
    Kiumarsi, A.
    Gashti, M. Parvinzadeh
    Rashidian, R.
    Norouzi, M. Hossein
    EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2011, 56 (01):
  • [47] IMPROVED ADHESIVE PROPERTIES OF HIGH-MODULUS POLYETHYLENE STRUCTURES .3. AIR-PLASMA AND AMMONIA-PLASMA TREATMENT
    MERCX, FPM
    POLYMER, 1994, 35 (10) : 2098 - 2107
  • [48] Ecological Materials and Methods in the Textile Industry: Atmospheric-Plasma Treatments of Naturally Colored Cotton
    Demir, Asli
    Ozdogan, Esen
    Ozdil, Nilgun
    Gurel, Aynur
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 119 (03) : 1410 - 1416
  • [49] Air-plasma pre-treatment for polypropylene automotive bumpers
    Guild, F. J.
    Green, M. D.
    Stewart, R.
    Goodship, V.
    JOURNAL OF ADHESION, 2008, 84 (06): : 530 - 542
  • [50] SECTION FOR AIR-PLASMA CUTTING OF HIGH-ALLOY STEELS
    SOSNITSK.AT
    GAPONENK.LN
    KULICHEN.GF
    WELDING PRODUCTION, 1973, 20 (11): : 61 - 63
12345