Atmospheric air-plasma treatments of polyester textile structures

被引：0

作者：

Leroux, F. ^{[1
]}

Perwuelz, A. ^{[1
]}

Campagne, C. ^{[1
]}

Behary, N. ^{[1
]}

机构：

[1] GEMTEX Research Laboratory, Ecole Nationale Supérieure des Arts et Industrie Textiles (ENSAIT), 9 rue de l'Ermitage, F-59070 Roubaix Cedex 1, France

来源：

Journal of Adhesion Science and Technology | 2006年 / 20卷 / 09期

关键词：

The effects of atmospheric air-plasma treatments on woven and non-woven polyester (PET) textile structures were studied by surface analysis methods: wettability and capillarity methods; as well as atomic force microscopy/lateral force microscopy (AFM/LFM). The water contact angle on plasma-treated PET decreased from 80°to 50-40°; indicating an increase in the surface energy of PET fibres due to a change in the fiber surface chemical nature; which was confirmed by a higher fiber friction force measured by the LFM. The extent of water contact angle decrease; as well as the wash fastness of the treatment varied with the structure of the textile. Indeed the more porous the textile structure is (such as a non-woven); the fewer are the chain scissions of the PET at the fiber surface; during the plasma treatment. Thus; the level of surface oxidation and the weak boundary layers formation depend not only on plasma treatment parameters but also on the textile structure. © VSP 2006;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：939 / 957

共 50 条

[21] Portable device for manual air-plasma cutting
Anon
Avtomaticheskaya Svarka, 1998, (03):
[22] Air-Plasma Characterization at THz Frequency range
Huang, Yindong
Zheng, Zhigang
Guo, Quan
Meng, Chao
Li, Zhihui
Zhang, Dongwen
Yuan, Jianmin
Zhao, Zengxiu
2017 42ND INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ), 2017,
[23] Treatment of steel by an air-plasma ARC with scanning
Dombrovskii, Yu.M.
Brover, A.V.
Metal Science and Heat Treatment, 41 (01): : 12 - 15
[24] WELDING METAL AFTER AIR-PLASMA CUTTING
ASNIS, AE
AUTOMATIC WELDING USSR, 1973, 26 (09): : 71 - 71
[25] Synthesis and structures of zwitterionic polymers to induce electrostatic interaction with PDMS surface treated by air-plasma
Tanaka, Mutsuo
Hirata, Yoshiki
Sawaguchi, Takahiro
Kurosawa, Shigeru
ARKIVOC, 2018, : 330 - 343
[26] TECHNOLOGICAL AND ENERGY CHARACTERISTICS OF AIR-PLASMA GOUGING
SHALIMOV, AP
WELDING PRODUCTION, 1976, 23 (10): : 47 - 49
[27] ARC VOLTAGE DURING MANUAL AIR-PLASMA CUTTING
VASILEV, KV
GUZEINOV, NG
NIKIFOROV, MI
AUTOMATIC WELDING USSR, 1973, 26 (02): : 26 - 27
[28] Atmospheric pressure air-plasma jet evolved from microdischarges: Eradication of E. coli with the jet
Hong, Yong Cheol
Kang, Won Seok
Hong, Yoo Beom
Yi, Won Ju
Uhm, Han Sup
PHYSICS OF PLASMAS, 2009, 16 (12)
[29] POSSIBLE METHODS OF INCREASING SPEED OF AIR-PLASMA CUTTING
BYKHOVSKII, DG
NEDOREZOV, IV
AUTOMATIC WELDING USSR, 1972, 25 (03): : 33 - +
[30] Textile Performance of Polyester, Nylon 6 and Acetate Fabrics Treated with Atmospheric Pressure Plasma Jet
Gotoh, Keiko
Katsuura, Akiko
Honma, Aya
Kobayashi, Yasuyuki
SEN-I GAKKAISHI, 2013, 69 (09) : 169 - 176

← 1 2 3 4 5 →