Enhanced mechanical properties of CNTs/Mg biomimetic laminated composites

被引：0

作者：

Song, Zhengxiang ^{[1
]}

Hu, Xiaoshi ^{[2
]}

Xiang, Yeyang ^{[2
]}

Wu, Kun ^{[2
]}

Wang, Xiaojun ^{[1
]}

机构：

[1] National Key Laboratory of Precision Hot Processing of Metal, Harbin Institute of Technology, China

[2] School of Materials Science and Engineering, Harbin Institute of Technology, China

来源：

Materials Science and Engineering: A | 2021年 / 802卷

基金：

中国国家自然科学基金;

关键词：

Biomimetics - Carbon nanotubes - Cracks - Deposition - Electrophoresis - Failure (mechanical) - Laminating - Metallic matrix composites - Polymer matrix composites;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The conflict between strength and toughness of Mg matrix composites extremely limits its engineering application. Inspired by nacre, CNTs/Mg bionic laminated composites were prepared by electrophoretic deposition. Compared with Mg, the yield strength and elongation of the laminated composite was increased by 52% and 59% respectively. CNTs/Mg laminated structure intercepts dislocations between layers. Compared with homogeneous composites, the stacked dislocations produce higher back stress strengthening. In the meantime, the isolation effect of CNTs layer makes the plastic deformation more uniform which delays the happening of necking. During the failure stage, the laminated structure has higher tolerance to cracks and delays the propagation of cracks. Overall, the toughness is improved by improving the plastic deformability and delaying crack propagation. © 2020

引用

共 50 条

[31] Mechanical properties of Mg and Mg base alloy composites
Drozd, Z
Trojanová, Z
Pahutová, M
Ferkel, H
Riehemann, W
ADVANCED LIGHT ALLOYS AND COMPOSITES, 1998, 59 : 455 - 460
[32] Investigation on the Microstructure and Mechanical Properties of CNTs-AlSi10Mg Composites Fabricated by Selective Laser Melting
Luo, Shixuan
Li, Ruifeng
He, Peiyuan
Yue, Hangyu
Gu, Jiayang
MATERIALS, 2021, 14 (04) : 1 - 15
[33] The microstructure, mechanical and dielectric properties of CNTs/mullite ceramics composites
Wang, Jing
Kou, Huamin
Pan, Yubai
Guo, Jingkun
COMPOSITE MATERIALS IV, 2006, 313 : 145 - 150
[34] Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites
Lanfant, B.
Leconte, Y.
Debski, N.
Bonnefont, G.
Pinault, M.
Mayne-L'Hermite, M.
Habert, A.
Jorand, Y.
Garnier, V.
Fantozzi, G.
Le Gallet, S.
Bernard, F.
CERAMICS INTERNATIONAL, 2019, 45 (02) : 2566 - 2575
[35] Investigation of mechanical properties of masterbatches and composites with small additions of CNTs
Burmistrov, I. N.
Yudintseva, T. I.
Ilinykh, I. A.
Khaydarov, B. B.
Mazov, I. N.
Anshin, S. M.
Kuznetsov, D. V.
2ND INTERNATIONAL SYMPOSIUM ON FUNDAMENTAL ASPECTS OF RARE-EARTH ELEMENTS MINING AND SEPARATION AND MODERN MATERIALS ENGINEERING (REES-2015), 2016, 112
[36] The microstructure, mechanical and dielectric properties of CNTs/mullite ceramics composites
Wang, Jing
Kou, Huamin
Pan, Yubai
Guo, Jingkun
Key Engineering Materials, 2006, 313 : 145 - 150
[37] Study on Friction Properties of CNTs/AlSi10Mg Composites
Liao, Z.
Zou, L.
Pan, J.
Lin, Z.
HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2024, 79 (04): : 201 - 216
[38] Mechanical properties of biomimetic composites for bone tissue engineering
Verma, D
Katti, KS
Mohanty, B
MECHANICAL PROPERTIES OF BIOINSPIRED AND BIOLOGICAL MATERIALS, 2005, 844 : 293 - 298
[39] Mechanical properties of staggered-alignment biomimetic composites
Zhang, Z. Q.
Zhong, Y.
Liu, B.
Fang, D. N.
Hwang, K. C.
ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2008, 2008, : 606 - 609
[40] Effect of Mg plate pretreatment on microstructure and mechanical properties of Al/Mg/Al laminated composites fabricated by hot roll bonding
Yu, Yang
Xue, Xinzhe
Lu, Zhehao
Li, Tingyu
Ma, Cong
Yan, Pengfei
Yan, Biao
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2020, 34 (1-3):

← 1 2 3 4 5 →