Enhanced mechanical properties of CNTs/Mg biomimetic laminated composites

被引:0
|
作者
Song, Zhengxiang [1 ]
Hu, Xiaoshi [2 ]
Xiang, Yeyang [2 ]
Wu, Kun [2 ]
Wang, Xiaojun [1 ]
机构
[1] National Key Laboratory of Precision Hot Processing of Metal, Harbin Institute of Technology, China
[2] School of Materials Science and Engineering, Harbin Institute of Technology, China
基金
中国国家自然科学基金;
关键词
Biomimetics - Carbon nanotubes - Cracks - Deposition - Electrophoresis - Failure (mechanical) - Laminating - Metallic matrix composites - Polymer matrix composites;
D O I
暂无
中图分类号
学科分类号
摘要
The conflict between strength and toughness of Mg matrix composites extremely limits its engineering application. Inspired by nacre, CNTs/Mg bionic laminated composites were prepared by electrophoretic deposition. Compared with Mg, the yield strength and elongation of the laminated composite was increased by 52% and 59% respectively. CNTs/Mg laminated structure intercepts dislocations between layers. Compared with homogeneous composites, the stacked dislocations produce higher back stress strengthening. In the meantime, the isolation effect of CNTs layer makes the plastic deformation more uniform which delays the happening of necking. During the failure stage, the laminated structure has higher tolerance to cracks and delays the propagation of cracks. Overall, the toughness is improved by improving the plastic deformability and delaying crack propagation. © 2020
引用
收藏
相关论文
共 50 条
  • [21] Well-dispersion of CNTs and enhanced mechanical properties in CNTs/Cu-Ti composites fabricated by Molecular Level Mixing
    Liu, Liang
    Bao, Rui
    Yi, Jianhong
    Li, Caiju
    Tao, Jingmei
    Liu, Yichun
    Tan, Songlin
    You, Xin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 726 : 81 - 87
  • [22] Effect of Rolling Parameters on Microstructure, Texture, and Mechanical Properties of Al/Mg/Al Laminated Composites
    Sun, H. Y.
    Zhang, D. H.
    Ma, M.
    Zhang, J. X.
    Liu, W. C.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (09) : 7624 - 7640
  • [23] Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties
    Pengju WANG
    Zejun CHEN
    Hongtao HUANG
    Jianshu LIN
    Boxin LI
    Qing LIU
    Chinese Journal of Aeronautics , 2021, (08) : 192 - 201
  • [24] Effect of Rolling Parameters on Microstructure, Texture, and Mechanical Properties of Al/Mg/Al Laminated Composites
    H. Y. Sun
    D. H. Zhang
    M. Ma
    J. X. Zhang
    W. C. Liu
    Journal of Materials Engineering and Performance, 2022, 31 : 7624 - 7640
  • [25] Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties
    Pengju WANG
    Zejun CHEN
    Hongtao HUANG
    Jianshu LIN
    Boxin LI
    Qing LIU
    Chinese Journal of Aeronautics, 2021, 34 (08) : 192 - 201
  • [26] Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties
    Wang, Pengju
    Chen, Zejun
    Huang, Hongtao
    Lin, Jianshu
    Li, Boxin
    Liu, Qing
    CHINESE JOURNAL OF AERONAUTICS, 2021, 34 (08) : 192 - 201
  • [27] Synergistic Strengthening of Mechanical Properties and Electromagnetic Interference Shielding Performance of Carbon Nanotubes (CNTs) Reinforced Magnesium Matrix Composites by CNTs Induced Laminated Structure
    Sun, Zhenming
    Shi, Hailong
    Hu, Xiaoshi
    Yan, Mufu
    Wang, Xiaojun
    MATERIALS, 2022, 15 (01)
  • [28] Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs
    Chen, Junfeng
    Yan, Laixing
    Liang, Siyan
    Cui, Xiping
    Liu, Chaonong
    Wang, Bingshu
    Zou, Linchi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 901
  • [29] Enhanced thermal and mechanical properties of optimized SiCf/SiC composites with in-situ CNTs on PyC interface
    Li, Zhexin
    Li, Xiaoqiang
    Zhang, Boxin
    Zhou, Xianguo
    Liu, Chuanxin
    Jiang, Yu
    Zhen, Cheng
    Zheng, Ce
    Zhang, Litong
    Cheng, Laifei
    CERAMICS INTERNATIONAL, 2020, 46 (11) : 18071 - 18078
  • [30] Fabrication and mechanical properties of CNTs/Mg composites prepared by combining friction stir processing and ultrasonic assisted extrusion
    Liang, Junhao
    Li, Hejun
    Qi, Lehua
    Tian, Wenlong
    Li, Xuefeng
    Chao, Xujiang
    Wei, Jianfeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 728 : 282 - 288