Strain Characteristics of Surface Acoustic Wave Resonators on X-Cut LiTaO3

被引：0

作者：

Peng, Dingkang ^{[1
]}

Peng, Bin ^{[1
]}

Yang, Zhengzhong ^{[2
]}

Wang, Zhihao ^{[1
]}

Zhang, Wanli ^{[1
]}

机构：

[1] Univ Elect Sci & Technol China, State Key Lab Elect Thin Films & Integrated Device, Chengdu 610054, Peoples R China

[2] China Acad Engn Phys, Microsyst & Terahertz Res Ctr, Chengdu 610200, Peoples R China

来源：

IEEE SENSORS JOURNAL | 2024年 / 24卷 / 16期

关键词：

Strain coefficient of frequency (SCF); strain sensor; surface acoustic wave (SAW); X-cut LiTaO3 (LT); SAW TEMPERATURE SENSOR; WIRELESS;

D O I：

10.1109/JSEN.2024.3418132

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This work investigates the strain characteristics of surface acoustic wave (SAW) resonators fabricated on X-cut LiTaO3 (LT) substrates with varied Euler angles for exploring potential applications in strain sensing. The simulation and experimental results show that both Rayleigh wave and shear horizontal wave can be excited in (90 degrees, 90 degrees,Psi) LT substrates when Psi is ranged from 132 degrees to 162 degrees. The resonance frequencies of both Rayleigh wave and shear horizontal wave shift with applied strain. The strain coefficient of frequency (SCF) strongly depends on the acoustic wave propagation direction. The maximum sensitivities of Rayleigh wave and shear horizontal wave to applied strain are about -0.94 and -0.41 ppm/ mu epsilon for Psi=122 degrees and Psi=132 degrees, respectively. It is also found that some SAW resonators deposited on certain Euler angles exhibit insensitivity to applied strain. The results of this work provide valuable insights for designing and optimizing SAW strain sensors based on LT substrates.

引用

页码：25369 / 25373

页数：5

共 50 条

[31] Lamb Wave Resonators and Resonator Filters in Periodical Poled Z-cut LiTaO3 Plate
Kadota, Michio
Ogami, Takashi
Yamamoto, Kansho
Cho, Yasuo
Tanaka, Shuji
2016 IEEE 11TH ANNUAL INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS (NEMS), 2016,
[32] Acoustic Wave Devices using Periodical Poled Z-cut LiTaO3 Plate
Kadota, Michio
Ogami, Takashi
Yamamoto, Kansho
Cho, Yasuo
2009 JOINT MEETING OF THE EUROPEAN FREQUENCY AND TIME FORUM AND THE IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM, VOLS 1 AND 2, 2009, : 919 - +
[33] Three-dimensional analysis of forced piezoelectric vibrations of rectangular AT-cut quartz plates and X-cut LiTaO3 plates
Sekimoto, H
Soga, M
Goka, S
Watanabe, Y
PROCEEDINGS OF THE 2000 IEEE/EIA INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM & EXHIBITION, 2000, : 401 - 403
[34] Rayleigh SAW-Assisted SH-SAW Immunosensor on X-Cut 148-Y LiTaO3
Kogai, Takashi
Yatsuda, Hiromi
Kondoh, Jun
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2017, 64 (09) : 1375 - 1381
[35] Development of a New Surface Acoustic Wave Based Gyroscope on a X-112°Y LiTaO3 Substrate
Wang, Wen
Liu, Jiuling
Xie, Xiao
Liu, Minghua
He, Shitang
SENSORS, 2011, 11 (11) : 10894 - 10906
[36] Multilayered structures using thin plates of LiTaO3 for acoustic wave resonators with high quality factor
Naumenko, Natalya F.
ULTRASONICS, 2018, 88 : 115 - 122
[37] Optimal cut for leaky SAW on LiTaO3 for high performance resonators and filters
Kawachi, O
Mineyoshi, S
Endoh, G
Ueda, M
Ikata, O
Hashimoto, K
Yamaguchi, M
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2001, 48 (05) : 1442 - 1448
[38] Effect of crystal phases on refractive index profiles of annealed proton-exchanged waveguides in X-cut LiTaO3
Maring, DB
Tavlykaev, RF
Ramaswamy, RV
Korkishko, YN
Fedorov, VA
Zavada, JM
APPLIED PHYSICS LETTERS, 1998, 73 (04) : 423 - 425
[39] LITAO3 LATERAL FIELD RESONATORS
WEINERT, RW
MCAVOY, BR
DRISCOLL, MM
MOORE, RA
TIERSTEN, HF
IEEE 1989 ULTRASONICS SYMPOSIUM : PROCEEDINGS, VOLS 1 AND 2, 1989, : 477 - 480
[40] MATERIAL CONSTANTS OF LITAO3 DETERMINED FROM SURFACE-ACOUSTIC-WAVE VELOCITIES
TAKI, K
SHIMIZU, Y
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1994, 33 (5B): : 2976 - 2978

← 1 2 3 4 5 →