Research Status and Development Trend of Lock-in Infrared Thermography Detection of Material Subsurface / Surface Defects

被引：0
|
作者：
Wang, Huipeng [1 ]
Cai, Dongwei [1 ,2 ]
Dong, Lihong [2 ]
Lin, En [2 ,3 ]
Wang, Haidou [2 ,4 ]
机构：
[1] School of Mechanical and Electrical Engineering, Jiangxi University of Technology, Jiangxi, Ganzhou,341000, China
[2] National Key Laboratory for Remanufaeturing, Army Academy of Armored Forces, Beijing,100072, China
[3] School of Mechanical Engineering, Zhejiang University of Technology, Hangzhou,310023, China
[4] National Engineering Research Center for Remanufacture of Mechanical Products, Army Academy of Armored Forces, Beijing,100072, China
来源：
Cailiao Daobao/Materials Reports | 2024年 / 38卷 / 18期
基金：
中国国家自然科学基金;
关键词：
Effective detection of subsurface / surface defects of materials is an important guarantee to ensure the safety and reliability of structures. Lock-in infrared thermography is a branch of active infrared thermography. Because of its advantages of low heating excitation power intensity; insensitive to non-uniform heating and surface emissivity changes; it is widely used in defect detection such as subsurface delamination and debonding of materials. In recent years; with the deepening of research; lock-in infrared thermography has also proposed effective characterization methods for surface crack detection and depth quantification. Defect detection such as small; deep and irregular defects and defect detection in heterogeneous materials and complex structures have always been hot and difficult points in defect detection. Domestic and foreign scholars committed to proposing new defect characterization methods; reducing the influence of noise; transverse thermal diffusion and other factors on defect detection; and improving the ability of qualitative detection and quantitative characterization of defects. In this review; the research of domestic and foreign scholars is summarized from the perspectives of defect characterization extraction methods and detection of influencing factors; and the research of lock-in infrared thermography on the subsurface and surface defect detection of materials is summarized; and the prospect of lock-in infrared thermography is prospected. © 2024 Cailiao Daobaoshe/ Materials Review. All rights reserved;
D O I：
10.11896/cldb.23020112
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [11] Automatic Detection of CFRP Subsurface Defects via Thermal Signals in Long Pulse and Lock-In Thermography
    Cheng, Xiaoying
    Chen, Ping
    Wu, Zhenyu
    Cech, Martin
    Ying, Zhiping
    Hu, Xudong
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2023, 72
  • [12] Lock-in inductive thermography for surface crack detection
    Oswald-Tranta, Beata
    THERMOSENSE: THERMAL INFRARED APPLICATIONS XL, 2018, 10661
  • [13] Quantitative determination of a subsurface defect of reference specimen by lock-in infrared thermography
    Choi, Manyong
    Kang, Kisoo
    Park, Jeonghak
    Kim, Wontae
    Kim, Koungsuk
    NDT & E INTERNATIONAL, 2008, 41 (02) : 119 - 124
  • [14] EXPERIMENTAL STUDY ON DEFECTS DETECTION IN GFRP LAMINATES USING LOCK-IN INFRARED THERMOGRAPHY TECHNOLOGY
    Tang, Qing-Ju
    Qu, Ze-Shen
    Xu, Gui-Peng
    Tan, Xin-Jie
    THERMAL SCIENCE, 2024, 28 (02): : 1169 - 1174
  • [15] EXPERIMENTAL STUDY ON DEFECTS DETECTION IN GFRP LAMINATES USING LOCK-IN INFRARED THERMOGRAPHY TECHNOLOGY
    Tang, Qing-Ju
    Qu, Ze-Shen
    Xu, Gui-Peng
    Tan, Xin-Jie
    THERMAL SCIENCE, 2024, 28 (2A): : 1169 - 1174
  • [16] On-power detection of wall-thinned defects using lock-in infrared thermography
    Yoo, Kwae Hwan
    Kim, Ju Hyun
    Na, Man Gyun
    Kim, Jin Weon
    Kim, Kyeong Suk
    NUCLEAR ENGINEERING AND DESIGN, 2014, 280 : 542 - 549
  • [17] Suitability of Lock-in Infrared Thermography for Luminescent Glass Development
    Nolte, Peter W.
    Ziegeler, Nils
    Rimbach, A. Charlotte
    Malvisalo, Timo
    Schweizer, Stefan
    14TH QUANTITATIVE INFRARED THERMOGRAPHY CONFERENCE, 2018, : 984 - 989
  • [18] Suitability of lock-in infrared thermography for luminescent glass development
    Nolte, Peter W.
    Ziegeler, Nils
    Rimbach, A. Charlotte
    Schweizer, Stefan
    QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL, 2020, 17 (02) : 96 - 106
  • [19] Quantitative determination of subsurface defects in a reference specimen made of Plexiglas by means of lock-in and pulse phase infrared thermography
    Montanini, Roberto
    INFRARED PHYSICS & TECHNOLOGY, 2010, 53 (05) : 363 - 371
  • [20] Evaluation about Detection of Defects in the Nuclear Piping Loop System Using Lock-in Infrared Thermography
    Kim, S. C.
    Jung, H. C.
    Kim, K. S.
    13TH QUANTITATIVE INFRARED THERMOGRAPHY CONFERENCE, 2016, : 397 - 406
12345