Effect of heat treatment on microstructure and corrosion behavior of Al[sbnd]Cu alloy fabricated by wire arc additive manufacturing

被引：0
|
作者：
Ren, Guochun [1 ,3 ]
Zheng, Yang [1 ,2 ,3 ]
Xiong, Ruize [1 ,3 ]
Zhao, Cenya [2 ,3 ]
Wang, Tianqi [1 ,3 ]
Li, Liangyu [1 ,3 ]
机构：
[1] School of Mechanical Engineering, Tiangong University, Tianjin,300387, China
[2] School of Aeronautics and Astronautics, Tiangong University, Tianjin,300387, China
[3] Tianjin Area Major Laboratory of Advanced Mechatronics Equipment Technology, Tianjin,300387, China
来源：
Materials Characterization | 2024年 / 218卷
关键词：
This study investigated the effect of heat treatment on the microstructure and corrosion behavior of the Wire Arc Additive Manufacturing (WAAM) 2319 Al alloy. The results showed that the solid solution treatment and the artificial ageing significantly increased the microhardness of the alloy; and the second phase of the alloy changed from a continuous to a dispersed distribution. Heat treatment led to an increase in pores; and the number of small-size pores increased significantly with the ageing time; this increased the risk of crevice corrosion. The as-deposited WAAM 2319 Al alloy; characterized by an α-Al matrix and coarse intergranular intermetallics Al2Cu; underwent galvanic corrosion; which severely damaged the passivation film. The solid solution treatment alleviated this by dissolving the coarse intergranular intermetallics and improving corrosion resistance. During artificial ageing; the corrosion potential decreased gradually as the size and number of precipitated phases increased. Pitting corrosion was the most severe; and corrosion resistance was lowest in the solid solution + peak ageing state. © 2024 Elsevier Inc;
D O I：
10.1016/j.matchar.2024.114516
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [31] Microstructure and properties of Ni–Ti–Cu alloy fabricated in situ by treble-wire arc additive manufacturing
    Yu, Peng
    Liang, Zhetao
    Chen, Xinya
    Ma, Hengsheng
    Shao, Mingfu
    Han, Jian
    Tian, Yinbao
    Virtual and Physical Prototyping, 2025, 20 (01)
  • [32] Effect of yttrium content on microstructure and properties of 2319 aluminum alloy fabricated by wire arc additive manufacturing
    Hanjie Xuebao/Transactions of the China Welding Institution, 2022, 43 (07): : 49 - 56
  • [33] Microstructure evolution and mechanical properties of the wire plus arc additive manufacturing Al-Cu alloy
    Wang, Zhennan
    Lin, Xin
    Wang, Lilin
    Cao, Yang
    Zhou, Yinghui
    Huang, Weidong
    ADDITIVE MANUFACTURING, 2021, 47
  • [34] Microstructure and Mechanical Properties of Cu-6.5%Al Alloy Deposited by Wire Arc Additive Manufacturing
    Wang, Yanhu
    Su, Chuanchu
    Konovalov, Sergey
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021, 10 (05) : 634 - 641
  • [35] Microstructure and Mechanical Properties of Cu-6.5%Al Alloy Deposited by Wire Arc Additive Manufacturing
    Yanhu Wang
    Chuanchu Su
    Sergey Konovalov
    Metallography, Microstructure, and Analysis, 2021, 10 : 634 - 641
  • [36] Microstructure and properties of Ti/Al composites materials fabricated by wire and arc additive manufacturing
    Xia Y.
    Zhang X.
    Liao H.
    Teng H.
    Zheng D.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2021, 42 (08): : 18 - 24
  • [37] Effect of heat treatment on the microstructure and mechanical properties of AZ91D magnesium alloy fabricated via GTA wire arc additive manufacturing
    Cai, Xiaoyu
    Chen, Fukang
    Dong, Bolun
    Lin, Sanbao
    Journal of Materials Research and Technology, 2024, 33 : 3308 - 3323
  • [38] Effect of Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Fabricated by Laser-Arc Hybrid Additive Manufacturing
    Chen, Yuhang
    Fu, Juan
    Zhou, Lilong
    Zhao, Yong
    Wang, Feiyun
    Chen, Guoqiang
    Qin, Yonghui
    COATINGS, 2024, 14 (05)
  • [39] Stress corrosion behavior and microstructure analysis of Al-Zn-Mg-Cu alloys fabricated by CMT wire arc additive manufacturing with different post-treatments
    Zou, Tianyou
    Duan, Shuwei
    Wu, Dongting
    Matsuda, Kenji
    Guo, Fuqiang
    Zou, Yong
    Journal of Alloys and Compounds, 2025, 1010
  • [40] Microstructure and properties research of Al-Zn-Mg-Cu alloy with high strength and high elongation fabricated by wire arc additive manufacturing
    Ren, Xuelei
    Jiang, Xiaoqing
    Yuan, Tao
    Zhao, Xiaohu
    Chen, Shujun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 307
12345