Effect of heat treatment on microstructure and corrosion behavior of Al[sbnd]Cu alloy fabricated by wire arc additive manufacturing

被引：0
|
作者：
Ren, Guochun [1 ,3 ]
Zheng, Yang [1 ,2 ,3 ]
Xiong, Ruize [1 ,3 ]
Zhao, Cenya [2 ,3 ]
Wang, Tianqi [1 ,3 ]
Li, Liangyu [1 ,3 ]
机构：
[1] School of Mechanical Engineering, Tiangong University, Tianjin,300387, China
[2] School of Aeronautics and Astronautics, Tiangong University, Tianjin,300387, China
[3] Tianjin Area Major Laboratory of Advanced Mechatronics Equipment Technology, Tianjin,300387, China
来源：
Materials Characterization | 2024年 / 218卷
关键词：
This study investigated the effect of heat treatment on the microstructure and corrosion behavior of the Wire Arc Additive Manufacturing (WAAM) 2319 Al alloy. The results showed that the solid solution treatment and the artificial ageing significantly increased the microhardness of the alloy; and the second phase of the alloy changed from a continuous to a dispersed distribution. Heat treatment led to an increase in pores; and the number of small-size pores increased significantly with the ageing time; this increased the risk of crevice corrosion. The as-deposited WAAM 2319 Al alloy; characterized by an α-Al matrix and coarse intergranular intermetallics Al2Cu; underwent galvanic corrosion; which severely damaged the passivation film. The solid solution treatment alleviated this by dissolving the coarse intergranular intermetallics and improving corrosion resistance. During artificial ageing; the corrosion potential decreased gradually as the size and number of precipitated phases increased. Pitting corrosion was the most severe; and corrosion resistance was lowest in the solid solution + peak ageing state. © 2024 Elsevier Inc;
D O I：
10.1016/j.matchar.2024.114516
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [1] Microstructure and corrosion resistance of Ni-Cu alloy fabricated through wire arc additive manufacturing
    Kannan, A. Rajesh
    Kumar, S. Mohan
    Pramod, R.
    Shanmugam, N. Siva
    Vishnukumar, M.
    Channabasavanna, S. G.
    MATERIALS LETTERS, 2022, 308
  • [2] The Effect of Cu Content on the Microstructure and Properties of the Wire Arc Additive Manufacturing Al-Cu Alloy
    Ren, Lingling
    Wang, Zhenbiao
    Wang, Shuai
    Li, Chengde
    Wang, Wei
    Ming, Zhu
    Zhai, Yuchun
    MATERIALS, 2023, 16 (07)
  • [3] Wire arc additive manufacturing of the Al-5.55Cu alloy: Insight the effect of intrinsic heat treatment on microstructure and mechanical properties
    Dai, Hongbin
    Liu, Fang
    Xia, Yunhao
    Dong, Bolun
    Cai, Xiaoyu
    Lin, Sanbao
    MATERIALS CHARACTERIZATION, 2024, 211
  • [4] Microstructure, hardness, and electrical resistivity of Al-Cu alloy fabricated via wire arc additive manufacturing
    Kannan, A. Rajesh
    Rajkumar, V.
    Vasudevan, Srinivasan Vinju
    Jerome, Peter
    Oh, Tae Hwan
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [5] Investigation on the microstructure and corrosion properties of Inconel 625 alloy fabricated by wire arc additive manufacturing
    Wang, Yangfan
    Chen, Xizhang
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
  • [6] Effect of heat treatment on the microstructure and properties of CuCrZr alloy manufactured by wire arc additive manufacturing
    Diao, Zhaowei
    Yang, Fei
    Wang, Rui
    Zhang, Yang
    Chen, Lin
    Xiong, Tao
    Yang, Wei
    Rong, Mingzhe
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 967
  • [7] Microstructure and properties of CuCrZr alloy fabricated by wire arc additive manufacturing
    Diao, Zhaowei
    Yang, Fei
    Xiong, Tao
    Chen, Lin
    Wu, Yifei
    Rong, Mingzhe
    MATERIALS LETTERS, 2023, 339
  • [8] Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy fabricated by wire plus arc additive manufacturing
    Yu, Zhanliang
    Yuan, Tao
    Xu, Min
    Zhang, Hongda
    Jiang, Xiaoqing
    Chen, Shujun
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 62 : 430 - 439
  • [9] Effect of Different Post-heat Processes on Mechanical Properties and Corrosion Behavior of Al-Cu-Mg-Ag Fabricated by Wire Arc Additive Manufacturing
    Liu, Liang
    He, Zhi
    Zhang, Long
    Xiao, Jun
    Cao, Wenbo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (24) : 14107 - 14118
  • [10] Microstructure, mechanical, and corrosion resistance of copper nickel alloy fabricated by wire-arc additive manufacturing
    Guo, Chun
    Kang, Taiyu
    Wu, Suisong
    Ying, Meng
    Liu, Wu Meng
    Chen, Feng
    MRS COMMUNICATIONS, 2021, 11 (06) : 910 - 916
12345