The Effect of Homogenization Parameters on the Structure of EN AW-6082 Alloy

被引：0
|
作者：
Luštinec J. [1 ]
Očenášek V. [1 ]
Jelínek M., jr. [2 ]
机构：
[1] SVÚM a.s., Tovární 2053, Čelákovice
[2] Constellium Extrusions Děčín s.r.o., Ústecká 751/37, Děčín V-Rozbělesy
来源：
Manufacturing Technology | 2017年 / 17卷 / 05期
关键词：
EN AW-6082 aluminium alloy; Extrusion; Homogenization; Phases; Structure;
D O I：
10.21062/ujep/x.2017/a/1213-2489/MT/17/5/766
中图分类号：
学科分类号：
摘要：
High temperature homogenization annealing of DC cast billets from aluminium alloys used for extrusion pressing is considered as one of substantial technological operations during extrusion processing. The structure of DC cast billets consists of dendrite cell structure and contains coarse and inhomogeneously distributed intermetallic phases of β-AlFeSi and α-Al(Fe,Mn)Si type.Structure after a homogenization annealing is quite decisive for both the final properties of extrusions and the extrudability of the cast structure. The present paper deals with the medium strength heat-treatable EN AW-6082 alloy. It is investigated the effect of heating rate, time at the annealing temperature and the cooling rate of continually cast billets during the homogenization annealing on the changes of electrical conductivity, structure and intermetallic phases. Copyright © 2017. Published by Manufacturing Technology. All rights reserved.
引用
收藏
相关论文
共 50 条
  • [21] 环形EN AW-6082铝合金锻件的热处理
    赵丽美
    尚贺军
    热处理, 2018, 33 (05) : 47 - 51
  • [22] Ultra fine structure and properties formation of en AW 6082 alloy
    Faculty of Metallurgy, Technical University of Košice, Letná9, Slovakia
    不详
    High Temp Mater Processes, 2008, 3 (193-202):
  • [23] Ultra Fine Structure and Properties Formation of EN AW 6082 Alloy
    Kvackaj, Tibor
    Fujda, Martin
    Milkovic, Ondrej
    Besterci, Michal
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2008, 27 (03) : 193 - 202
  • [24] Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∨ CFRP
    Delp, Alexander
    Wu, Shuang
    Freund, Jonathan
    Scholz, Ronja
    Loebbecke, Miriam
    Troester, Thomas
    Haubrich, Jan
    Walther, Frank
    MATERIALS, 2024, 17 (08)
  • [25] MODIFICATION OF THE CAST STRUCTURE OF AN EN AW 2011 ALLOY WITH HOMOGENIZATION
    Voncina, Maja
    Paulin, Irena
    Debevec, Ana
    Nagode, Ala
    MATERIALI IN TEHNOLOGIJE, 2021, 55 (02): : 327 - 333
  • [26] TIG Welding of EN AW-6082 Al Alloy: A Comparative Analysis of Filler Rods on Microstructural and Mechanical Performance
    Alzahrani, Bandar
    Ahmed, Mohamed M. Z.
    Habba, Mohamed I. A.
    Fouad, Ramy A.
    Elshaghoul, Yousef G. Y.
    Gadallah, Elshafey Ahmed
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2025, 9 (01):
  • [27] Influence of rolling texture on near-threshold crack extension behavior in aluminum alloy EN AW-6082
    Wicke, Marcel
    Brueckner-Foit, Angelika
    Kirsten, Tina
    Zimmermann, Martina
    Buelbuel, Fatih
    Christ, Hans-Juergen
    MATERIALS TESTING, 2019, 61 (04) : 309 - 316
  • [28] EFFECT OF TEMPERATURE AND STRAIN RATE ON FRICTION FACTOR DURING MICROFORMING OF AW-6082 AL-ALLOY
    Bernd-Arno, Behrens
    Hans, Conrads
    Pavel, Petrov
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 613 - 616
  • [29] Influence of Hot Deformation on Mechanical Properties and Microstructure of a Twin-Roll Cast Aluminium Alloy EN AW-6082
    O. Grydin
    M. Stolbchenko
    F. Nürnberger
    M. Schaper
    Journal of Materials Engineering and Performance, 2014, 23 : 937 - 943
  • [30] Experimental and Numerical Investigations on Metal Flow during Direct Extrusion of EN AW-6082
    Kammler, M.
    Hadifi, T.
    Nowak, M.
    Bouguecha, A.
    PROGRESS IN EXTRUSION TECHNOLOGY AND SIMULATION OF LIGHT METAL ALLOYS, 2012, 491 : 137 - +
12345