Elastic deformation error model for calibration and compensation of parallel kinematic mechanism machine tool

被引：0
|
作者：
Matsushita, Tetsuya [1 ]
Ueno, Hiroshi [1 ]
Matsubara, Atsushi [2 ]
机构：
[1] OKUMA Corporation, 5-25-1 Oguchi-cho, Niwa-gun, Aichi 480-0193, Japan
[2] Department of Micro Engineering, Graduate School of Engineering, Kyoto University, Yoshidahonmachi, Sakyo-ku, Kyoto 606-8501, Japan
来源：
International Journal of Automation Technology | 2012年 / 6卷 / 02期
关键词：
Machine tools - Kinematics - Error compensation - Precision engineering - Elastic deformation;
D O I：
10.20965/ijat.2012.p0188
中图分类号：
学科分类号：
摘要：
In the motion error of parallel kinematic mechanism machine tools, the elastic deformation caused by external forces, such as gravity, as well as the kinematic parameter error, is a significant factor. Internal forces generated by the rotational resistance of passive joints also deform mechanical components. In this paper, an elastic deformation error model that can deal with external and internal forces is presented. A compensation system and a calibration method of kinematic parameters employing this model are also presented. It is experimentally verified that this calibration method and compensation system improve the motion accuracy of a parallel kinematic mechanism machine tool.
引用
收藏
页码：188 / 195
相关论文
共 50 条
  • [31] Calibration of parallel kinematic machine tools using mobility constraint on the tool center point
    Abtahi, M.
    Pendar, H.
    Alasty, A.
    Vossoughi, Gh. R.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 45 (5-6): : 531 - 539
  • [32] Robustness of Thermal Error Compensation Model of CNC Machine Tool
    Lang, Xianli
    Miao, Enming
    Gong, Yayun
    Niu, Pengcheng
    Xu, Zhishang
    EIGHTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION, 2013, 8759
  • [33] Study of error modeling in kinematic calibration of parallel manipulators
    Wang, Liping
    Liu, Yuzhe
    Wu, Jun
    Wang, Jinsong
    Zhang, Binbin
    INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS, 2016, 13 : 1 - 12
  • [34] Constraint operator for the kinematic calibration of a parallel mechanism
    Lee, MK
    Kim, TS
    Park, KW
    Kwon, SH
    KSME INTERNATIONAL JOURNAL, 2003, 17 (01): : 23 - 31
  • [35] Forward kinematic calibration of delta parallel mechanism
    Han, Jiangyi
    You, Youpeng
    Yu, Qikai
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2013, 44 (06): : 253 - 257
  • [36] Constraint operator for the kinematic calibration of a parallel mechanism
    Min Ki Lee
    Tae Sung Kim
    Kun Woo Park
    Sung Ha Kwon
    KSME International Journal, 2003, 17 : 23 - 31
  • [37] Simplified kinematic calibration for a class of parallel mechanism
    Tanaka, W
    Arai, T
    Inoue, K
    Mae, Y
    Park, CS
    2002 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS I-IV, PROCEEDINGS, 2002, : 483 - 488
  • [38] Simple yet effective approach for error compensation of a tripod-based parallel kinematic machine
    Huang, Tian
    Whitehouse, David J.
    CIRP Annals - Manufacturing Technology, 2000, 49 (01) : 285 - 288
  • [39] A simple yet effective approach for error compensation of a tripod-based parallel kinematic machine
    Huang, T
    Whitehouse, DJ
    CIRP ANNALS 2000: MANUFACTURING TECHNOLOGY, 2000, : 285 - 288
  • [40] Artefact calibration of parallel mechanism, kinematic calibration with a priori knowledge
    Sato, O
    Shimojima, K
    Furutani, R
    Takamasu, K
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2004, 15 (06) : 1158 - 1165
12345