Elastic deformation error model for calibration and compensation of parallel kinematic mechanism machine tool

被引：0
|
作者：
Matsushita, Tetsuya [1 ]
Ueno, Hiroshi [1 ]
Matsubara, Atsushi [2 ]
机构：
[1] OKUMA Corporation, 5-25-1 Oguchi-cho, Niwa-gun, Aichi 480-0193, Japan
[2] Department of Micro Engineering, Graduate School of Engineering, Kyoto University, Yoshidahonmachi, Sakyo-ku, Kyoto 606-8501, Japan
来源：
International Journal of Automation Technology | 2012年 / 6卷 / 02期
关键词：
Machine tools - Kinematics - Error compensation - Precision engineering - Elastic deformation;
D O I：
10.20965/ijat.2012.p0188
中图分类号：
学科分类号：
摘要：
In the motion error of parallel kinematic mechanism machine tools, the elastic deformation caused by external forces, such as gravity, as well as the kinematic parameter error, is a significant factor. Internal forces generated by the rotational resistance of passive joints also deform mechanical components. In this paper, an elastic deformation error model that can deal with external and internal forces is presented. A compensation system and a calibration method of kinematic parameters employing this model are also presented. It is experimentally verified that this calibration method and compensation system improve the motion accuracy of a parallel kinematic mechanism machine tool.
引用
收藏
页码：188 / 195
相关论文
共 50 条
  • [21] Kinematic Calibration and Forecast Error Compensation of a 2-DOF Planar Parallel Manipulator
    CHANG Peng1
    revised January 7
    accepted June 30
    published electronically July 28
    Chinese Journal of Mechanical Engineering, 2011, 24 (06) : 992 - 998
  • [22] A clearance approach of kinematic calibration and error compensation for 3-RRR parallel robot
    Zhang, Xian-Min
    Liu, Han
    Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2014, 42 (07): : 97 - 103
  • [23] Calibration and compensation of machine tool volumetric error using a laser tracker
    Wan, An
    Song, Libin
    Xu, Jing
    Liu, Shaoli
    Chen, Ken
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2018, 124 : 126 - 133
  • [24] Error modeling and compensation for parallel kinematic machines
    Song, J
    Mou, JI
    King, C
    PARALLEL KINEMATIC MACHINES: THEORETICAL ASPECTS AND INDUSTRIAL REQUIREMENTS, 1999, : 171 - 187
  • [25] Error Modeling and Kinematic Calibration of Parallel Robots
    Yu, Dayong
    Cong, Dacheng
    2008 CHINESE CONTROL AND DECISION CONFERENCE, VOLS 1-11, 2008, : 2162 - 2167
  • [26] Kinematic calibration of the parallel Argos mechanism
    Vischer, P
    Clavel, R
    ROBOTICA, 2000, 18 : 589 - 599
  • [27] Kinematic Calibration of High-Payload Transferring Robot Based on Compensation of Flexible Deformation Error
    Feng, Yalei
    Xu, Fang
    Li, Xuewei
    Zou, Fengshan
    2014 11TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA), 2014, : 2442 - 2445
  • [28] Kinematic calibration of a 5-DoF parallel kinematic machine
    Song, Yimin
    Zhang, Jiateng
    Lian, Binbin
    Sun, Tao
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 45 : 242 - 261
  • [29] Calibration of parallel kinematic machine tools using mobility constraint on the tool center point
    Abtahi, M.
    Pendar, H.
    Alasty, A.
    Vossoughi, Gh. R.
    International Journal of Advanced Manufacturing Technology, 2009, 45 (5-6): : 531 - 539
  • [30] Calibration of parallel kinematic machine tools using mobility constraint on the tool center point
    M. Abtahi
    H. Pendar
    A. Alasty
    Gh. R. Vossoughi
    The International Journal of Advanced Manufacturing Technology, 2009, 45 : 531 - 539
12345