The influence of the filler material on weld joints made of duplex stainless steels

被引：0
|
作者：
Ertel J. [1 ]
Bárta J. [1 ]
Marônek M. [1 ]
Bílik J. [1 ]
机构：
[1] Slovak University of technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Institute of Production Technologies, Department of Welding and Foundry
来源：
Materials Science Forum | 2016年 / 862卷
关键词：
Mechanical properties; Phase ratio; Quality control; Super-duplex stainless steel; Welding parameters;
D O I：
10.4028/www.scientific.net/MSF.862.59
中图分类号：
学科分类号：
摘要：
Application of beam welding methods for joining austenitic, duplex and other stainless steels is the right choice which not only lowers weld joint degradation but increases the production efficiency. There are many different demands on butt joints of duplex steels. One of them is equal ratio between austenite and ferrite of weld metal, because it can significantly influence the weld joints performance in real environment. The aim of this paper is to evaluate the influence of filler material on mechanical and technological properties of weld joints made from stainless steel SAF 2507. © 2016 Trans Tech Publications, Switzerland.
引用
收藏
页码：59 / 65
页数：6
相关论文
共 50 条
  • [41] Influence of weld repair on the residual stresses induced in austenitic stainless steel weld joints
    Das Banik, Sayantan
    Kumar, Suranjit
    Singh, Pawan Kumar
    Bhattacharya, Sujay
    PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2023, 17 (01): : 81 - 94
  • [42] Precipitation and toughness behaviour of thick-walled weld joints made of duplex steel
    Schweissen und Schneiden/Welding and Cutting, 1997, 49 (11):
  • [43] Precipitation and toughness behaviour of thick-walled weld joints made of duplex steel
    Krull, Peter
    Pries, Helge
    Wohlfahrt, Helmut
    Tosch, Josef
    Welding Research Abroad, 1998, 44 (05): : 2 - 7
  • [44] Advances in Duplex Stainless Steels
    Pezzato, Luca
    Calliari, Irene
    MATERIALS, 2022, 15 (20)
  • [45] Properties of Duplex Stainless Steels
    Aoki, So
    Sakai, Jun'ichi
    Zairyo to Kankyo/ Corrosion Engineering, 2024, 73 (03): : 49 - 53
  • [46] Welding duplex and super duplex stainless steels
    Karlsson, L
    ANTI-CORROSION METHODS AND MATERIALS, 1995, 42 (06) : 30 - 35
  • [47] DUPLEX STAINLESS-STEELS
    MCGURN, JF
    CIM BULLETIN, 1988, 81 (914): : 70 - 70
  • [48] Influence of Filler Metal on the Microstructure and Mechanical Properties of 316Ti-15-5 PH Stainless Steel Weld Joints
    Kumar, Ravi Ranjan
    Singh, Randhir Kumar
    Anoop, C. R.
    Das, Ranjan
    Murty, S. V. S. Narayana
    Tharian, K. Thomas
    Alex, A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (12) : 10099 - 10107
  • [49] Electrochemical studies of welded joints corrosion resistance made from stainless steels
    Kovalev, Mark
    Shakhmatov, Aleksey
    Alhimenko, Aleksey
    MATERIALS TODAY-PROCEEDINGS, 2020, 30 : 501 - 505
  • [50] Weldability of Duplex Stainless Steels - Thermal Cycle and Nitrogen Effects Duplex stainless steel weld microstructures were investigated as a function of weld thermal cycles and shielding gas nitrogen content
    Varbai, B.
    Adonyi, Y.
    Baumer, R.
    Pickle, T.
    Dobranszky, J.
    Majlinger, K.
    WELDING JOURNAL, 2019, 98 (03) : 78S - 87S
12345