The influence of the filler material on weld joints made of duplex stainless steels

被引：0
|
作者：
Ertel J. [1 ]
Bárta J. [1 ]
Marônek M. [1 ]
Bílik J. [1 ]
机构：
[1] Slovak University of technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Institute of Production Technologies, Department of Welding and Foundry
来源：
Materials Science Forum | 2016年 / 862卷
关键词：
Mechanical properties; Phase ratio; Quality control; Super-duplex stainless steel; Welding parameters;
D O I：
10.4028/www.scientific.net/MSF.862.59
中图分类号：
学科分类号：
摘要：
Application of beam welding methods for joining austenitic, duplex and other stainless steels is the right choice which not only lowers weld joint degradation but increases the production efficiency. There are many different demands on butt joints of duplex steels. One of them is equal ratio between austenite and ferrite of weld metal, because it can significantly influence the weld joints performance in real environment. The aim of this paper is to evaluate the influence of filler material on mechanical and technological properties of weld joints made from stainless steel SAF 2507. © 2016 Trans Tech Publications, Switzerland.
引用
收藏
页码：59 / 65
页数：6
相关论文
共 50 条
  • [21] Influence of Parameters of Plasma Welding on the Properties of Welded Joints of Duplex Stainless Steels in Mode with Deep Remelting
    Ulrich, Koloman
    Kovarikova, Ingrid
    Simekova, Beata
    III CENTRAL EUROPEAN CONFERENCE ON LOGISTICS, 2013, 309 : 69 - 74
  • [22] INFLUENCE OF NITROGEN ADDITION TO DUPLEX STAINLESS-STEELS
    HOSHINO, A
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (16): : 2279 - 2286
  • [23] Influence of the microstructure on the plastic behaviour of duplex stainless steels
    Jorge Junior, Alberto Moreira
    Reis, Gedeon Silva
    Balancin, Oscar
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2259 - 2264
  • [24] Influence of microstructure on the plastic behavior of duplex stainless steels
    Reis, Gedeon Silva
    Balancin, Oscar
    REM-REVISTA ESCOLA DE MINAS, 2008, 61 (04) : 499 - 503
  • [25] Duplex stainless steels
    Berardi, Christina
    Springs, 2002, 41 (05): : 59 - 63
  • [26] Influence of Alloying on α-α′ Phase Separation in Duplex Stainless Steels
    Garfinkel, David A.
    Poplawsky, Jonathan D.
    Guo, Wei
    Young, George A.
    Tucker, Julie D.
    PROCEEDINGS OF THE 18TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS - WATER REACTORS, VOL 2, 2018, : 1183 - 1192
  • [27] Influence of arc energy and filler metal composition on the microstructure in wire arc additive manufacturing of duplex stainless steels
    Benjamin Wittig
    Manuela Zinke
    Sven Jüttner
    Welding in the World, 2021, 65 : 47 - 56
  • [28] Influence of arc energy and filler metal composition on the microstructure in wire arc additive manufacturing of duplex stainless steels
    Wittig, Benjamin
    Zinke, Manuela
    Juettner, Sven
    WELDING IN THE WORLD, 2021, 65 (01) : 47 - 56
  • [29] Mechanism for enhanced age hardening of 22 % Cr duplex stainless steel weld metal fabricated with grade 2209 filler material
    Sakata M.
    Kadoi K.
    Inoue H.
    Materials Today Communications, 2022, 33
  • [30] EFFECTS OF FERRITE CONTENT AND MICROSEGREGATION ON SOLIDIFICATION CRACK SUSCEPTIBILITY OF DUPLEX STAINLESS STEEL WELD METALS - WELD CRACK SUSCEPTIBILITY OF DUPLEX STAINLESS STEELS (REPORT 1).
    Matsuda, Fukuhisa
    Nakagawa, Hiroji
    Kato, Ichiro
    Murata, Yoshiaki
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1987, 5 (03): : 329 - 335
12345