The influence of the filler material on weld joints made of duplex stainless steels

被引：0
|
作者：
Ertel J. [1 ]
Bárta J. [1 ]
Marônek M. [1 ]
Bílik J. [1 ]
机构：
[1] Slovak University of technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Institute of Production Technologies, Department of Welding and Foundry
来源：
Materials Science Forum | 2016年 / 862卷
关键词：
Mechanical properties; Phase ratio; Quality control; Super-duplex stainless steel; Welding parameters;
D O I：
10.4028/www.scientific.net/MSF.862.59
中图分类号：
学科分类号：
摘要：
Application of beam welding methods for joining austenitic, duplex and other stainless steels is the right choice which not only lowers weld joint degradation but increases the production efficiency. There are many different demands on butt joints of duplex steels. One of them is equal ratio between austenite and ferrite of weld metal, because it can significantly influence the weld joints performance in real environment. The aim of this paper is to evaluate the influence of filler material on mechanical and technological properties of weld joints made from stainless steel SAF 2507. © 2016 Trans Tech Publications, Switzerland.
引用
收藏
页码：59 / 65
页数：6
相关论文
共 50 条
  • [1] Influence of Filler Material on the Microstructural and Mechanical Properties of 430 Ferritic Stainless Steel Weld Joints
    Shanmugasundar, G.
    Bansod, Ankur
    Schindlerova, Vladimira
    Cep, Robert
    MATERIALS, 2023, 16 (04)
  • [2] CORROSION PERFORMANCE OF GIRTH-WELD JOINTS OF DUPLEX STAINLESS-STEELS
    TAMAKI, K
    YASUDA, K
    KIMURA, M
    CORROSION, 1989, 45 (09) : 764 - 770
  • [3] Metallographic Contrasting of Weld Joints on Duplex Stainless Steel
    Weilnhammer, G.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2019, 56 (07): : 443 - 448
  • [4] Influence of the filler material on pitting corrosion in welded duplex stainless steel 2205
    Múnez C.J.
    Utrilla M.V.
    Ureña A.
    Otero E.
    Welding International, 2010, 24 (02) : 105 - 110
  • [5] Influence of the filler material on the pitting corrosion in welded duplex stainless steel 2205
    Múnez, C.J.
    Utrilla, M.V.
    Ureña, A.
    Otero, E.
    Revista de Metalurgia (Madrid), 2007, 43 (04): : 245 - 251
  • [6] Influence of Inclusions on the Pitting Behavior of Cast Duplex Stainless Steels and Patch Weld Layers
    Liu, Zehui
    Liu, Ming
    Yang, Mengyuan
    Xu, Lining
    Li, Jinxu
    Qiao, Lijie
    CORROSION, 2025, 81 (03) : 267 - 279
  • [7] Influence of the filler material on the pitting corrosion in welded duplex stainless steel 2205
    Munez, C. J.
    Utrilla, M. V.
    Urena, A.
    Otero, E.
    REVISTA DE METALURGIA, 2007, 43 (04) : 245 - 251
  • [8] The Influence of Post Weld Heat Treatment Precipitation on Duplex Stainless Steels Weld Overlay towards Pitting Corrosion
    Sim, Bernard-Maxmillan
    Hong, Tang-Sai
    Hanim, Mohamed Arif-Azmah
    Tchan, Edwin-Jong Nyon
    Talari, Mahesh-Kumar
    MATERIALS, 2019, 12 (20)
  • [9] Mechanical properties of duplex stainless steels laser joints
    Amigo, V
    Bonache, V
    Teruel, L
    Vicente, A
    REVISTA DE METALURGIA, 2005, 41 (02) : 90 - 97
  • [10] Influence of precipitation phase of Cr2N on comprehensive performances of weld joints for S32101 duplex stainless steels
    Ding, L. Z.
    Wang, H.
    Meng, Q. S.
    MATERIALS RESEARCH INNOVATIONS, 2013, 17 : S215 - S219
12345