Enhancement in performance of parabolic trough collector with serrated twisted-tape inserts

被引:0
|
作者
Rawani A. [1 ]
Sharma S.P. [1 ]
Singh K.D.P. [1 ]
机构
[1] Department of Mechanical Engineering, National Institute of Technology, Jamshedpur, Jharkhand
来源
Int. J. Thermodyn. | / 2卷 / 111-119期
关键词
Collector efficiency factor; Collector heat removal factor; Efficiency; Useful heat gain;
D O I
10.5541/ijot.5000210005
中图分类号
学科分类号
摘要
The aim of this study is to analytically investigate the performance of parabolic trough collector (PTC) with serrated twisted tape insert in the absorber tube. The heat transfer equations for fully developed flow under quasi-steady state conditions have been developed in order to analyze entropy generation, exergy efficiency, thermal efficiency, rise in fluid temperature and to study the effect of system and operating parameters on performance. A computer program, based on mathematical models is developed in C++ language to estimate the temperature rise of fluid for evaluation of performances under specified conditions. For numerical simulations four different twist ratio, x = 1,2,3,4 and mass flow rate 0.06 kg/s to 0.16 kg/s (3000≤Re≤9000) are used. This study shows that twisted tape insert when used shows great promise for enhancing the performance of PTC. Results show that for x=1, Nusselt number/heat transfer coefficient is found to be 4.38 and 3.51 times over plain absorber of PTC at mass flow rate of 0.06 kg/s and 0.16 kg/s respectively; while corresponding enhancement in thermal efficiency is 15.7% and 5.41% respectively. Also the exergy efficiency has been found to be 12.10% and 12.62% and enhancement factor is 1.157 and 1.053 for same set of conditions.
引用
收藏
页码:111 / 119
页数:8
相关论文
共 50 条
  • [21] Heat transfer by laminar flow in a vertical pipe with twisted-tape inserts
    Klaczak, A
    HEAT AND MASS TRANSFER, 2000, 36 (03) : 195 - 199
  • [22] Performance study of flat plate solar collector integrated with twisted tape inserts
    Vijay, R.
    Vijayakumar, P.
    Kumaresan, G.
    Kumar, S. Gokul
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 1222 - 1226
  • [23] Multiple cylindrical inserts for parabolic trough solar collector
    Bellos, Evangelos
    Daniil, Ilias
    Tzivanidis, Christos
    APPLIED THERMAL ENGINEERING, 2018, 143 : 80 - 89
  • [24] Performance analysis of solar parabolic trough receiver with twisted perforated conical inserts
    Singh, Sushma
    Samir, Sushant
    Kumar, Khushmeet
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [25] The utilization of conical strip inserts in a parabolic trough collector
    Amani, Keyvan
    Ebrahimpour, Mahdi
    Akbarzadeh, Sanaz
    Valipour, Mohammad Sadegh
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2020, 140 (03) : 1625 - 1631
  • [26] The utilization of conical strip inserts in a parabolic trough collector
    Keyvan Amani
    Mahdi Ebrahimpour
    Sanaz Akbarzadeh
    Mohammad Sadegh Valipour
    Journal of Thermal Analysis and Calorimetry, 2020, 140 : 1625 - 1631
  • [28] Heat transfer by laminar flow in a vertical pipe with twisted-tape inserts
    A. Klaczak
    Heat and Mass Transfer, 2000, 36 : 195 - 199
  • [29] Experimental Study With Analytical Validation of Energy Parameters in Parabolic Trough Collector With Twisted Tape Insert
    Arunachala, U. C.
    JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (03):
  • [30] Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral
    Peijing Li
    Taixiu Liu
    Yuanlong Qin
    Zhimei Zheng
    Kai Zhao
    Qibin Liu
    Journal of Thermal Science, 2024, 33 : 658 - 674