A theoretical analysis and experimental verification of a laser drilling process for a ceramic substrate

被引：0
|
作者：
机构：
[1] Chen, Ming-Fei
[2] Hsiao, Wen-Tse
[3] Wang, Ming-Cheng
[4] Yang, Kai-Yu
[5] Chen, Ying-Fang
来源：
Hsiao, Wen-Tse (wentse@itrc.narl.org.tw) | 1723年 / Springer London卷 / 81期
关键词：
This paper reports theoretical and experimental methods for drilling alumina ceramic substrates by using a nanosecond-pulsed ultraviolet laser. A physical model was established using ANSYS parameter design language finite element software. The influence of laser parameters; such as laser fluence; number of pulses and its duration; and frequency; on morphology—depth; diameter; taper; and temperature distribution—was investigated using three-dimensional confocal laser scanning microscopy. Simulation and experimental results reveal that higher laser fluence and number of pulses produces larger drilling depths and diameters. Laser fluence; pulse duration; frequency; and pulse number of 5.10 J/cm2; 1000 μs; 20 kHz; and; >9; respectively; can successfully drill through the alumina ceramic substrate. Pulse duration between 3 and 8 ms yielded the smallest hole taper. © 2015; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [41] Theoretical and experimental investigation of pulsed laser grooving process
    Stournaras, Aristidis
    Salonitis, Konstantinos
    Stavropoulos, Panagiotis
    Chryssolouris, George
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (1-2): : 114 - 124
  • [42] Low power laser process:: theoretical and experimental studies
    de Izarra, C
    Pennaneac'h, M
    Vallée, O
    HIGH TEMPERATURE MATERIAL PROCESSES, 1999, 3 (04): : 421 - 431
  • [43] FEEDFORWARD LINEARIZATION OF ANALOG MODULATED LASER-DIODES - THEORETICAL-ANALYSIS AND EXPERIMENTAL-VERIFICATION
    HASSIN, D
    VAHLDIECK, R
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 1993, 41 (12) : 2376 - 2382
  • [44] Experimental and Theoretical Investigation of CO2 Laser Drilling of Fused Silica
    Nayak, Barada K.
    Akarapu, Ravindra
    Carberry, Joel P.
    Liu, Anping
    JOURNAL OF LASER MICRO NANOENGINEERING, 2014, 9 (01): : 79 - 82
  • [45] Theoretical and experimental studies of ultra-short pulsed laser drilling of steel
    Michalowski, Andreas
    Qin, Yuan
    Weber, Rudolf
    Graf, Thomas
    LASER SOURCES AND APPLICATIONS II, 2014, 9135
  • [46] Theoretical Analysis and Experimental Verification of Tooth Parameters of Die Cavity for Cold Sizing Process of Spur Gear
    Zhang Bao-hong
    Zhang Zhi-min
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 366 - 369
  • [47] Numerical prediction of hole profile in laser drilling process and experimental validation
    Bharat B. Satapathy
    Jaydev Rana
    Kalipada Maity
    The International Journal of Advanced Manufacturing Technology, 2017, 90 : 3099 - 3107
  • [48] Numerical prediction of hole profile in laser drilling process and experimental validation
    Satapathy, Bharat B.
    Rana, Jaydev
    Maity, Kalipada
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 90 (9-12): : 3099 - 3107
  • [49] Experimental and theoretical study of substrate modes in (Al,In)GaN laser diodes
    Braun, H.
    Lauterbach, C.
    Schwarz, U. T.
    Laino, V.
    Witzigmann, B.
    Rumbolz, C.
    Schillgalies, M. O.
    Lell, A.
    Haerle, V.
    Strauss, U.
    PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 4 NO 7 2007, 2007, 4 (07): : 2772 - +
  • [50] Theoretical analysis and verification of concentration distribution model in the ultrafiltration process
    Wei, Jin-Min
    Wang, Bochu
    Chen, Ji
    Li, Biao
    COLLOIDS AND SURFACES B-BIOINTERFACES, 2006, 53 (01) : 94 - 100
12345