A theoretical analysis and experimental verification of a laser drilling process for a ceramic substrate

被引：0
|
作者：
机构：
[1] Chen, Ming-Fei
[2] Hsiao, Wen-Tse
[3] Wang, Ming-Cheng
[4] Yang, Kai-Yu
[5] Chen, Ying-Fang
来源：
Hsiao, Wen-Tse (wentse@itrc.narl.org.tw) | 1723年 / Springer London卷 / 81期
关键词：
This paper reports theoretical and experimental methods for drilling alumina ceramic substrates by using a nanosecond-pulsed ultraviolet laser. A physical model was established using ANSYS parameter design language finite element software. The influence of laser parameters; such as laser fluence; number of pulses and its duration; and frequency; on morphology—depth; diameter; taper; and temperature distribution—was investigated using three-dimensional confocal laser scanning microscopy. Simulation and experimental results reveal that higher laser fluence and number of pulses produces larger drilling depths and diameters. Laser fluence; pulse duration; frequency; and pulse number of 5.10 J/cm2; 1000 μs; 20 kHz; and; >9; respectively; can successfully drill through the alumina ceramic substrate. Pulse duration between 3 and 8 ms yielded the smallest hole taper. © 2015; Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [21] SiSn diodes: Theoretical analysis and experimental verification
    Hussain, Aftab M.
    Wehbe, Nimer
    Hussain, Muhammad M.
    APPLIED PHYSICS LETTERS, 2015, 107 (08)
  • [22] Experimental verification on the theoretical analysis of RCE photodetector
    Liu, Kai
    Liu, Liyi
    Huang, Yongqing
    Ren, Xiaomin
    Jiguang Yu Hongwai/Laser and Infrared, 2000, 30 (02): : 105 - 107
  • [23] Experimental verification of CMP process analysis
    Hashimoto, Yohei
    Suzuki, Norikazu
    Hino, Rei
    Shamoto, Eiji
    2007 INTERNATIONAL SYMPOSIUM ON MICRO-NANO MECHATRONICS AND HUMAN SCIENCE, VOLS 1 AND 2, 2007, : 592 - 597
  • [24] Theoretical investigation and experimental verification of compact folded substrate integrated waveguide
    Che, Wenquan
    Geng, Liang
    Wu, K.
    Chow, Y. L.
    2007 EUROPEAN MICROWAVE CONFERENCE, VOLS 1-4, 2007, : 380 - +
  • [25] Theoretical analysis of keyhole dynamics in polarized laser drilling
    Cho, Jung-Ho
    Na, Suck-Joo
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2007, 40 (24) : 7638 - 7647
  • [26] An analysis of repeatability of laser percussion drilling process
    Ng, GKL
    Li, L
    ICALEO(R) 2000: PROCEEDINGS OF THE LASER MATERIALS PROCESSING CONFERENCE, VOL 89, 2000, 89 : B31 - B40
  • [27] Thermal analysis and experimental verification of the transmission in a lunar drilling system
    Xiao, Hong
    Tang, Dewei
    Deng, Zongquan
    Li, Chuanyang
    Kong, Fanrui
    Jiang, Shengyuan
    APPLIED THERMAL ENGINEERING, 2017, 113 : 765 - 773
  • [28] Experimental analysis of drilling process in cortical bone
    Wang, Wendong
    Shi, Yikai
    Yang, Ning
    Yuan, Xiaoqing
    MEDICAL ENGINEERING & PHYSICS, 2014, 36 (02) : 261 - 266
  • [29] Experimental and numerical analysis of the friction drilling process
    Miller, Scott F.
    Li, Rui
    Wang, Hsin
    Shih, Albert J.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2006, 128 (03): : 802 - 810
  • [30] Theoretical approach to estimate laser process parameters for drilling in crystalline silicon
    Baier, T.
    Schulz-Ruthenberg, M.
    Annetowobla, M.
    Schlenker, T.
    Manz, D.
    PROGRESS IN PHOTOVOLTAICS, 2010, 18 (08): : 603 - 606
12345