Comparative study of heat exchanger tubes failure analysis using ECT and IRIS

被引：0

作者：

Saffiudeen, Mohamed Fayas ^{[1
]}

Syed, Abdullah ^{[1
]}

Mohammed, Fasil T. ^{[1
]}

Mughal, Mohammad Asghar ^{[1
]}

Alamri, Yassir A. ^{[2
]}

Alanazi, Mubarak A. ^{[3
]}

机构：

[1] Department of Mechanical Skills, Jubail Technical Institute, Royal Commission for Jubail and Yanbu, Jubail, Saudi Arabia

[2] Mechanical Engineering Department, Jubail Industrial College, Royal Commission for Jubail and Yanbu, Jubail, Saudi Arabia

[3] Electrical Engineering Department, Jubail Industrial College, Royal Commission for Jubail and Yanbu, Jubail, Saudi Arabia

来源：

Interactions | 2024年 / 245卷 / 01期

关键词：

Chemical industry - Concrete construction - Cooling towers - Eddy current testing - Fracture mechanics - Mineral oils - Tubing;

D O I：

10.1007/s10751-024-02131-5

中图分类号：

学科分类号：

摘要：

This article describes the comparative study of selected advanced tubing inspection nondestructive testing (NDT) methods of eddy current testing(ECT) & internal rotating inspection system (IRIS)for heat Exchanger equipment in the petrochemical industry. In this research tube material was SB 163 800 H (UNS 8810) and tubesheet material SB 564 800H (N08810). By utilizing two advanced tubing inspection methods of reporting, we can make adjustments to the process and extend the life of the heat exchanger by plugging tubes or retubing individual tubes or partial retubing or full retubing. The following data compares the suitability of ECT and IRIS for inspecting heat exchanger tubes. The capabilities of the considered NDT methods for tube inspections are presented in the study. Because of their high detectability and quick examination, nonferromagnetic materials like inconel should be tested by ECT. IRIS is ineffective on non-ferromagnetic materials like inconel based on experimentation and testing. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2024.

引用

共 50 条

[21] Failure analysis of corroded heat exchanger CuNi tubes from a geothermal plant
Morake, Joseph B.
Mutua, James M.
Ruthandi, Martin M.
Olakanmi, Eyitayo O.
Botes, Annelize
ENGINEERING FAILURE ANALYSIS, 2023, 153
[22] Failure and structural analysis: A case history on welded tubes in a naval heat exchanger
Arrigoni, B
Zonta, GL
CASE HISTORIES ON INTEGRITY AND FAILURES IN INDUSTRY, 1999, : 571 - 580
[23] Failure of heat exchanger tubes due to localized damage
Malik, MM
Salam, I
Tauqir, A
ENGINEERING PLASTICITY FROM MACROSCALE TO NANOSCALE PTS 1 AND 2, 2003, 233-2 : 151 - 156
[24] Failure of heat exchanger tubes in cooling water applications
van Wijngaarden, R
RISK, ECONOMY AND SAFETY, FAILURE MINIMISATION AND ANALYSIS: FAILURES 2000, 2000, : 123 - 133
[25] Failure Analysis of Duplex Stainless Steel for Heat Exchanger Tubes with Seawater Cooling Medium
Ardy, Husaini
Albatros, Thomas
Sumboja, Afriyanti
METALS, 2023, 13 (07)
[26] Investigation of failure of tubes in a heat exchanger for corrosion of dissolved oxygen
Huang, Song
Chen, Jie
Zhang, Wenpin
Xiong, Shutao
2019 5TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION, 2020, 440
[27] Failure Assessment of Heat Exchanger Tubes Due to Grooving Corrosion
Ranjbar, Khalil
Sharifi, Emad
JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2023, 23 (02) : 739 - 750
[28] The effect of plugging of tubes on failure of shell and tube heat exchanger
Farrahi, G. H.
Chamani, M.
Kiyoumarsioskouei, A.
Mahmoudi, A. H.
ENGINEERING FAILURE ANALYSIS, 2019, 104 : 545 - 559
[29] Failure Assessment of Heat Exchanger Tubes Due to Grooving Corrosion
Khalil Ranjbar
Emad Sharifi
Journal of Failure Analysis and Prevention, 2023, 23 : 739 - 750
[30] EVALUATION OF ADDITIVELY MANUFACTURED HEAT EXCHANGER TUBES USING EXPERIMENTAL AND CONJUGATE HEAT TRANSFER ANALYSIS
Wright, Lesley M.
Liu, Jong
Kamrath, Benjamin
Morris, Mark C.
PROCEEDINGS OF ASME TURBO EXPO 2023: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2023, VOL 7B, 2023,

← 1 2 3 4 5 →