Effect of die geometry on residual stress level present after bar drawing

被引：0
|
作者：
Kuboki, T. [1 ]
Akiyama, M. [1 ]
Neishi, Y. [1 ]
Kuroda, K. [1 ]
机构：
[1] Bar and Wire Proc. Devmt. Section, Corporate R and D Laboratories, Kokura Steel Works, Konomi-machi Kokura-kita-ku, Kitakyushu 802-8686, Japan
来源：
Ironmaking and Steelmaking | 2001年 / 28卷 / 01期
关键词：
Computer simulation - Drawing dies - Finite element method - Geometry - Residual stresses;
D O I：
10.1179/irs.2001.28.1.65
中图分类号：
学科分类号：
摘要：
A new drawing die designed to reduce the residual stresses in bar after drawing is presented. The die design consists of two consecutive straight taper portions, and the outlet portion has a very small die angle. The marked beneficial effect of adding the outlet portion was predicted by finite element modelling (FEM), and subsequently verified by measuring the residual stresses in drawn bars. The optimum range of the outlet die angle was determined using FEM. The new design requires a slightly longer die length than the conventional one, but it is short enough to be adopted in current production lines.
引用
收藏
页码：65 / 71
相关论文
共 50 条
  • [31] Effect of Cold Pressing Deformation on Microstructure and Residual Stress of 7050 Aluminum Alloy Die Forgings
    Li, Huiqu
    Wang, Liang
    He, Weiwei
    Cheng, Liqiang
    Chen, Junzhou
    Yi, Linna
    MATERIALS, 2023, 16 (14)
  • [32] Delayed cracking in 301LN austenitic steel after deep drawing: Martensitic transformation and residual stress analysis
    Berrahmoune, M. R.
    Berveiller, S.
    Inal, K.
    Patoor, E.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 : 262 - 266
  • [33] Effect of residual stress redistribution and weld reinforcement geometry on fatigue crack growth of butt welded joints
    Shahani, Amir Reza
    Shakeri, Iman
    Rans, Calvin David
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 139
  • [34] Welding residual stress and its effect on fatigue crack propagation after overloading
    Yuan, K.
    Sumi, Y.
    ANALYSIS AND DESIGN OF MARINE STRUCTURES, MARSTRUCT 2013, 2013, : 447 - 455
  • [35] Effect of saturation peening on shape and residual stress distribution after peen forming
    Takahiro Ohta
    Yoshihiro Sato
    The International Journal of Advanced Manufacturing Technology, 2022, 119 : 4659 - 4675
  • [36] Effect of saturation peening on shape and residual stress distribution after peen forming
    Ohta, Takahiro
    Sato, Yoshihiro
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (7-8): : 4659 - 4675
  • [37] 3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution
    Simsir, Caner
    Gur, C. Hakan
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 207 (1-3) : 211 - 221
  • [38] Investigating the effect of perforation geometry on the residual stress and mechanical behavior of 3D-printed honeycomb structure
    Nazari, Farshad
    Abedi, Afshin
    MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2025,
  • [39] Effect of substrate type on the evolution of residual stress during and after curing COB packages
    Sun, ZG
    Huang, WD
    Luo, L
    ACTA METALLURGICA SINICA, 2001, 37 (12) : 1281 - 1284
  • [40] Experimental and numerical study on the residual stress in a lattice truss sandwich structure: Effect of geometrical dimensions of punching die
    Jiang, Wen-chun
    Yang, B.
    Wang, B. Y.
    Chen, H.
    Gong, J. M.
    MATERIALS & DESIGN, 2013, 49 : 1048 - 1055
12345