Effect of die geometry on residual stress level present after bar drawing

被引：0
|
作者：
Kuboki, T. [1 ]
Akiyama, M. [1 ]
Neishi, Y. [1 ]
Kuroda, K. [1 ]
机构：
[1] Bar and Wire Proc. Devmt. Section, Corporate R and D Laboratories, Kokura Steel Works, Konomi-machi Kokura-kita-ku, Kitakyushu 802-8686, Japan
来源：
Ironmaking and Steelmaking | 2001年 / 28卷 / 01期
关键词：
Computer simulation - Drawing dies - Finite element method - Geometry - Residual stresses;
D O I：
10.1179/irs.2001.28.1.65
中图分类号：
学科分类号：
摘要：
A new drawing die designed to reduce the residual stresses in bar after drawing is presented. The die design consists of two consecutive straight taper portions, and the outlet portion has a very small die angle. The marked beneficial effect of adding the outlet portion was predicted by finite element modelling (FEM), and subsequently verified by measuring the residual stresses in drawn bars. The optimum range of the outlet die angle was determined using FEM. The new design requires a slightly longer die length than the conventional one, but it is short enough to be adopted in current production lines.
引用
收藏
页码：65 / 71
相关论文
共 50 条
  • [21] Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates
    Gannon, Liam
    Liu, Yi
    Pegg, Neil
    Smith, Malcolm
    MARINE STRUCTURES, 2010, 23 (03) : 385 - 404
  • [22] Residual stress measurement by neutron diffraction inside a steel bar quenched after induction heating
    Tokuda, H
    Tomota, Y
    Suzuki, T
    Kawasaki, K
    Moriai, A
    Minakawa, N
    Morii, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2004, 90 (12): : 1038 - 1042
  • [23] A study on the influence of mechanical properties on the distribution of axial residual stress after cold drawing of metallic bars
    Kuboki, T
    Kawakami, I
    Neishi, Y
    Kuroda, K
    AKiyama, M
    MATERIALS SCIENCE RESEARCH INTERNATIONAL, 2001, 7 (01): : 41 - 46
  • [24] Effect of Thermal cycles and Dimensions of the Geometry on Residual stress of the Alumina-Kovar Joint
    Mishra, Srishti
    Pal, Snehanshu
    Karak, Swapan Kumar
    Shah, Sejal
    Nagaraju, M. Venakata
    Chakraborty, Arun Kumar
    7TH NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS (NCPCM 2017), 2018, 338
  • [25] FEM analysis of effect of die angle on strain and stress state in process of drawing of steel for prestressed concrete
    Pilarczyk, JW
    Markowski, J
    METALURGIJA, 2005, 44 (03): : 227 - 230
  • [26] The Effect of Thermomechanical Treatment on Residual Stress Level of A53 Steel Pipe
    Ramdan, Raden Dadan
    Pratiwi, Irma
    Kresna, Dwiki Panji
    Martawirya, Suryandaru
    Senatama, Bagas Ade
    Tarigan, Emia Yoseva
    Jiwapasca, M. Bagaskara
    4TH INTERNATIONAL CONFERENCE ON THE SCIENCE AND ENGINEERING OF MATERIALS (ICOSEM 2019), 2020, 2284
  • [27] EFFECT OF RESIDUAL STRESS AND REINFORCEMENT GEOMETRY IN AN ANISOTROPIC COMPOSITE ROTATING DISC HAVING VARYING THICKNESS
    Gupta, Vandana
    Singh, S. B.
    INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND ENGINEERING, 2012, 1 (04)
  • [28] Effect of geometry and materials on residual stress measurement in thin films by using the focused ion beam
    Kang, KJ
    Darzens, S
    Choi, GS
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2004, 126 (04): : 457 - 464
  • [29] Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints
    De Giorgi, M.
    Scialpi, A.
    Panella, F. W.
    De Filippis, L. A. C.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (01) : 26 - 35
  • [30] Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints
    M. De Giorgi
    A. Scialpi
    F. W. Panella
    L. A. C. De Filippis
    Journal of Mechanical Science and Technology, 2009, 23 : 26 - 35
12345