Dynamic mixed mode crack propagation behavior of structural bonded joints

被引：0
|
作者：
Lee, Ouk Sub [1 ]
Kobayashi, Albert S. [2 ]
机构：
[1] Sch. Mech., Aerosp. Automat. Eng., Inha University, Inchon 402-751, Korea, Republic of
[2] Department of Mechanical Engineering, University of Washington, Seattle, WA 98195-2600, United States
来源：
Key Engineering Materials | 2000年 / 183卷
关键词：
Cameras - Cantilever beams - Crack propagation - Interfaces (materials) - Joints (structural components) - Least squares approximations - Loads (forces) - Stress analysis - Stress intensity factors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The stress field around the dynamically propagating interface crack tip under a mixed mode loading condition has been studied by using a hybrid experimental method. The variation of dynamic stress field around the dynamic interfacial crack tip is photographed by the Cranz-Shardin type camera having 106 fps rate. The dynamic interfacial crack propagating velocities and the shapes of isochromatic fringe loop are characterized for varying mixed conditions in double cantilever beam (DCB) specimen. The dynamic interfacial crack tip complex stress intensity factors, K1 and K2, are extracted by using the overdeterministic least square method. In addition, it is found that the dynamic interface crack propagating velocities under the mixed mode loading conditions are significantly small compared to those obtained under the mode I impact loading conditions by Shukla and Rosakis in the USA.
引用
收藏
相关论文
共 50 条
  • [21] The use of a modified mixed mode bending test for characterization of mixed-mode fracture behavior of adhesively bonded metal joints
    Liu, Z
    Gibson, RF
    Newaz, GM
    JOURNAL OF ADHESION, 2002, 78 (03): : 223 - 244
  • [22] Numerical analysis of directionally unstable crack propagation in adhesively bonded joints
    Chen, B
    Dillard, DA
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2001, 38 (38-39) : 6907 - 6924
  • [23] A study on fatigue crack propagation in thick composite adhesively bonded joints
    Bernasconi, A.
    Jamil, A.
    Moroni, F.
    Pirondi, A.
    INTERNATIONAL JOURNAL OF FATIGUE, 2013, 50 : 18 - 25
  • [24] Validation of fracture envelopes of structural adhesives for mixed-mode strength prediction of bonded joints
    Ribeiro, J. P. S. M. B.
    Campilho, R. D. S. G.
    Rocha, R. J. B.
    Leal, A. J. S.
    Viana, F. A. L.
    FRATTURA ED INTEGRITA STRUTTURALE, 2019, 13 (48): : 332 - 347
  • [25] FATIGUE CRACK GROWTH OF BONDLINE CRACKS IN STRUCTURAL BONDED JOINTS
    BRUSSAT, TR
    CHIU, ST
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1978, 100 (01): : 39 - 45
  • [26] Finite element crack propagation of adhesively bonded repaired panels in general mixed-mode conditions
    Hosseini-Toudeshky, H.
    Saber, M.
    Mohammadi, B.
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2009, 45 (02) : 94 - 103
  • [27] DYNAMIC CRACK-PROPAGATION - SLIDING MODE
    WESOLOWSKI, Z
    BULLETIN DE L ACADEMIE POLONAISE DES SCIENCES-SERIE DES SCIENCES TECHNIQUES, 1977, 25 (06): : 461 - 464
  • [28] DYNAMIC CRACK-PROPAGATION - OPENING MODE
    WESOLOWSKI, Z
    BULLETIN DE L ACADEMIE POLONAISE DES SCIENCES-SERIE DES SCIENCES TECHNIQUES, 1977, 25 (06): : 453 - 459
  • [29] Crack growth analysis at adhesive-adherent interface in bonded joints under mixed mode I/II
    Marannano, G. V.
    Mistretta, L.
    Cirello, A.
    Pasta, S.
    ENGINEERING FRACTURE MECHANICS, 2008, 75 (18) : 5122 - 5133
  • [30] Mixed-mode crack growth in bonded composite joints under standard and impact-fatigue loading
    Ashcroft, Ian A.
    Casas-Rodriguez, Juan Pablo
    Silberschmidt, Vadim V.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (20) : 6704 - 6713
12345