Preparation and Microstructure Characterization of Ti-Based Alloy (TiAl+Ti) by Hot-pressed Sintering

被引：0
|
作者：
Yu, Qiuying [1 ]
Fang, Shuang [1 ]
Xiong, Huaping [1 ]
Zhao, Hengyue [2 ]
Zhang, Mincong [1 ]
Wang, Shuyun [1 ]
机构：
[1] Laboratory of Welding and Forging, Beijing Institute of Aeronautical Materials, Beijing,100095, China
[2] Shenyang Aircraft Corporation, Shenyang,110013, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2017年 / 46卷 / 05期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
TiAl strengthened Ti-based alloy was prepared by hot-pressed sintering of mixed powders of TiAl and Ti at 1473 K under a pressure of 30 MPa for 1.5 h. The effects of composition ratio on the phase constituent and microstructures of hot-pressed sintering products were subsequently analyzed by XRD and SEM. A large difference exists in the phase distribution for the sintering products with different composition ratios. The feasibility of TiAl reinforced Ti-based alloy is confirmed with TiAl/Ti volume ratio of 7:3. Element Fe is concentrated in Ti2Al and Ti3Al. TiAl, Ti2Al(Fe), Ti3Al(Fe) and Ti-based phases are mainly formed in the sintered product. Different types of diffusion reactions occur within the sintered body during hot-pressed sintering, and finally fine graded microstructures, Ti/Ti3Al(Fe)//Ti2Al(Fe)/TiAl, are formed. © 2017, Science Press. All right reserved.
引用
收藏
页码：1370 / 1374
相关论文
共 50 条
  • [41] Preparation and properties of borate glass coatings on Ti-based alloy substrates
    朱冬梅
    娄霞
    罗发
    熊良明
    周万城
    Transactions of Nonferrous Metals Society of China, 2007, (S1) : 766 - 769
  • [42] Preparation and properties of borate glass coatings on Ti-based alloy substrates
    Zhu Dong-mei
    Lou Xia
    Luo Fa
    Xiong Liang-ming
    Zhou Wan-cheng
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 : S766 - S769
  • [43] Microstructure and mechanical properties of hot-pressed B4C/(W,Ti)C ceramic composites
    Deng, JX
    Zhou, J
    Feng, YH
    Ding, ZL
    CERAMICS INTERNATIONAL, 2002, 28 (04) : 425 - 430
  • [44] Mechanically enhanced novel Ti-based alloy foams obtained by hot pressing
    Salvo, C.
    Aguilar, C.
    Guzman, D.
    Alfonso, I.
    Mangalaraja, R. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 759 (112-123): : 112 - 123
  • [45] Microstructure of Hot Isostatically Pressed Ti-6Al-4V Alloy after Hot Deformation
    Zhang, Zhimin
    Ren, Luying
    Xue, Yong
    Wu, Yaojin
    Wang, Qiang
    Xu, Jian
    Zhang, Huifang
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (03): : 820 - 826
  • [46] Microstructure of Hot Isostatically Pressed Ti-6Al-4V Alloy after Hot Deformation
    Zhang Zhimin
    Ren Luying
    Xue Yong
    Wu Yaojin
    Wang Qiang
    Xu Jian
    Zhang Huifang
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (03) : 820 - 826
  • [47] Microstructures of Mischmetal-Fe-B Hot-pressed Magnets with Ti Addition
    Ko, K. Y.
    Yoon, S.
    Ko, S. W.
    2ND INTERNATIONAL SYMPOSIUM ON ADVANCED MAGNETIC MATERIALS AND APPLICATIONS (ISAMMA 2010), 2011, 266
  • [48] PROPERTIES OF HOT-PRESSED Ti2AlN OBTAINED BY SHS PROCESS
    Chlubny, L.
    Lis, J.
    Bucko, M. M.
    Kata, D.
    ADVANCED CERAMIC COATINGS AND MATERIALS FOR EXTREME ENVIRONMENTS II, 2013, : 171 - 177
  • [49] Microstructure and mechanical properties of hot-pressed sintering Fe3Al intermetallics
    Li, Jing
    Yin, Yan-Sheng
    Liu, Ying-Cai
    Lin, Xiao-Juan
    Yue, Xue-Tao
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (04): : 16 - 21
  • [50] Microstructure and mechanical properties of hot-pressed carbon nanotubes compacted by spark plasma sintering
    Li, JL
    Bai, GZ
    Feng, JW
    Jiang, W
    CARBON, 2005, 43 (13) : 2649 - 2653
12345