Preparation and Microstructure Characterization of Ti-Based Alloy (TiAl+Ti) by Hot-pressed Sintering

被引：0
|
作者：
Yu, Qiuying [1 ]
Fang, Shuang [1 ]
Xiong, Huaping [1 ]
Zhao, Hengyue [2 ]
Zhang, Mincong [1 ]
Wang, Shuyun [1 ]
机构：
[1] Laboratory of Welding and Forging, Beijing Institute of Aeronautical Materials, Beijing,100095, China
[2] Shenyang Aircraft Corporation, Shenyang,110013, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2017年 / 46卷 / 05期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
TiAl strengthened Ti-based alloy was prepared by hot-pressed sintering of mixed powders of TiAl and Ti at 1473 K under a pressure of 30 MPa for 1.5 h. The effects of composition ratio on the phase constituent and microstructures of hot-pressed sintering products were subsequently analyzed by XRD and SEM. A large difference exists in the phase distribution for the sintering products with different composition ratios. The feasibility of TiAl reinforced Ti-based alloy is confirmed with TiAl/Ti volume ratio of 7:3. Element Fe is concentrated in Ti2Al and Ti3Al. TiAl, Ti2Al(Fe), Ti3Al(Fe) and Ti-based phases are mainly formed in the sintered product. Different types of diffusion reactions occur within the sintered body during hot-pressed sintering, and finally fine graded microstructures, Ti/Ti3Al(Fe)//Ti2Al(Fe)/TiAl, are formed. © 2017, Science Press. All right reserved.
引用
收藏
页码：1370 / 1374
相关论文
共 50 条
  • [31] Design, manufacture, and characterization of a novel Ti-based nanocrystalline alloy
    Renkó, József Bálint
    Károly, Dóra
    Bonyár, Attila
    Journal of Materials Research and Technology, 2021, 11 : 498 - 506
  • [32] Effects of Sintering Additives on Microstructure and Mechanical Properties of Hot-Pressed α-SiC Ceramics
    Yabin Zhu
    Zixuan Qin
    Jianlong Chai
    Tielong Shen
    Youfu Zhou
    Zhiguang Wang
    Metallurgical and Materials Transactions A, 2022, 53 : 1188 - 1199
  • [33] Sintering and strength of hot-pressed ceramics based on titanium diboride
    Koval'chenko, M. S.
    Ochkas, L. F.
    Litvin, R. V.
    Yurchenko, D. Z.
    Britun, V. F.
    POWDER METALLURGY AND METAL CERAMICS, 2007, 46 (9-10) : 436 - 441
  • [34] Design, manufacture, and characterization of a novel Ti-based nanocrystalline alloy
    Renko, Jozsef Balint
    Karoly, Dora
    Bonyar, Attila
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 11 : 498 - 506
  • [35] Optimization of Microstructure and Properties of CuCr/CNTs Composites by Hot-pressed Sintering and Rolling
    Li J.
    Zuo T.
    Xue J.
    Ru Y.
    Zhao X.
    Gao Z.
    Han L.
    Xiao L.
    Cailiao Daobao/Materials Reports, 2021, 35 (02): : 2078 - 2085
  • [36] Sintering and strength of hot-pressed ceramics based on titanium diboride
    M. S. Koval’chenko
    L. F. Ochkas
    R. V. Litvin
    D. Z. Yurchenko
    V. F. Britun
    Powder Metallurgy and Metal Ceramics, 2007, 46 : 436 - 441
  • [37] Effects of Sintering Additives on Microstructure and Mechanical Properties of Hot-Pressed α-SiC Ceramics
    Zhu, Yabin
    Qin, Zixuan
    Chai, Jianlong
    Shen, Tielong
    Zhou, Youfu
    Wang, Zhiguang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (04): : 1188 - 1199
  • [38] Synthesis of Ti-based glassy alloy/hydroxyapatite composite by spark plasma sintering
    Zhu, Shengli
    Wang, Xinmin
    Yoshimura, Masahiro
    Inoue, Akihisa
    MATERIALS TRANSACTIONS, 2008, 49 (03) : 502 - 505
  • [39] Analysis on high temperature properties of TiAl alloy joints brazd with a Ti-based filler
    Li Z.
    Li X.
    Li L.
    Lou L.
    Qu S.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (05): : 148 - 153
  • [40] Preparation of plating-diffusion composite coating on Ti-based alloy
    Wang, Li-jie
    Yang, Jun-sheng
    Sun, Bo
    Tian, Xiao-dong
    ADVANCED RESEARCH ON INDUSTRY, INFORMATION SYSTEMS AND MATERIAL ENGINEERING, PTS 1-7, 2011, 204-210 : 1741 - +
12345