Electroplating of Al-Ti and Ti in room temperature melt

被引：0
|
作者：
Takenaka, Toshihide [1 ]
Kawakami, Masahiro [1 ]
机构：
[1] Dept. of Production Systems Eng., Toyohashi University of Technology, Hibarigaoka 1-1, Tempaku-cho, Toyohashi 441-8580, Japan
来源：
International Journal of Materials and Product Technology | 2001年 / SPEC ISS. VOL.2期
关键词：
Aluminum alloys - Cathodes - Intermetallics - Molten materials - Salts - Surface structure - Titanium;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Electroplating of Al-Ti alloy in AlCl3-BPC (n-butylpyridinium-chloride) melts containing TICln (n=2,3,4) has been studied at 300∼450K. The cathode surface was covered with a smooth and dense metallic layer which consisted of mainly Al and included Ti. The surface became uneven with the increase in Ti content in the deposit. Intermetallic compounds of Al and Ti were not detected even in the deposit containing Ti more than 10 at%. Electrolysis in TICln (n=2,3,4)-BPC melts has been tested above the melting point of BPC (∼405K). Metallic electrodeposit was not obtained under any condition in these melts.
引用
收藏
页码：500 / 505
相关论文
共 50 条
  • [41] COMBUSTION SYNTHESIS OF Al-Ti INTERMETALLIC COMPOUNDS
    Naplocha, Krzysztof
    Granat, Kazimierz
    COMPOSITES THEORY AND PRACTICE, 2009, 9 (04): : 337 - 341
  • [42] The Research Progress on Preparation of Al-Ti Alloy
    Wei, X. D.
    Kan, H. M.
    Sun, X.
    Zhang, N.
    Wang, X. Y.
    Long, H. B.
    2018 INTERNATIONAL CONFERENCE OF GREEN BUILDINGS AND ENVIRONMENTAL MANAGEMENT (GBEM 2018), 2018, 186
  • [43] MICROSTRUCTURE IN RAPIDLY SOLIDIFIED AL-TI ALLOYS
    MAJUMDAR, A
    MUDDLE, BC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 169 (1-2): : 135 - 147
  • [44] NUCLEATION AND SOLIDIFICATION OF AL-TI ALLOYS - DISCUSSION
    ALLEN, DJ
    HUNT, JD
    METALLURGICAL TRANSACTIONS, 1975, A 6 (05): : 1117 - 1118
  • [45] SOLIDIFICATION CHARACTERISTICS OF ATOMIZED AL-TI POWDERS
    GUPTA, M
    MOHAMED, FA
    LAVERNIA, EJ
    SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (05): : 697 - 702
  • [46] The Microstructure in an Al-Ti Alloy Melt: The Wulff Cluster Model from a Partial Structure Factor
    Lin, Xiaohang
    Song, Lin
    Shao, Anchen
    Hua, Minghao
    Li, Hui
    Tian, Xuelei
    METALS, 2021, 11 (11)
  • [47] Temperature field modeling and experimental study on ultrasonic consolidation for Al-Ti foil
    Zhong, Xiangqiang
    Feng, Jiang
    Yao, Shunyu
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (06) : 2833 - 2840
  • [48] Temperature field modeling and experimental study on ultrasonic consolidation for Al-Ti foil
    Xiangqiang Zhong
    Jiang Feng
    Shunyu Yao
    Journal of Mechanical Science and Technology, 2019, 33 : 2833 - 2840
  • [49] NUCLEATION AND GROWTH-PATTERN OF AL3TI PRECIPITATES IN AL-TI ALLOYS
    BANERJI, A
    REIF, W
    METALL, 1986, 40 (08): : 778 - 782
  • [50] Achieving Al Melt/Carbon and Al-Ti Melts/Carbon Interfaces Wetting via Ultrasonic Couple Processing
    Li, Y. L.
    Zhou, T. G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (07): : 3337 - 3343
12345