Electroplating of Al-Ti and Ti in room temperature melt

被引：0
|
作者：
Takenaka, Toshihide [1 ]
Kawakami, Masahiro [1 ]
机构：
[1] Dept. of Production Systems Eng., Toyohashi University of Technology, Hibarigaoka 1-1, Tempaku-cho, Toyohashi 441-8580, Japan
来源：
International Journal of Materials and Product Technology | 2001年 / SPEC ISS. VOL.2期
关键词：
Aluminum alloys - Cathodes - Intermetallics - Molten materials - Salts - Surface structure - Titanium;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Electroplating of Al-Ti alloy in AlCl3-BPC (n-butylpyridinium-chloride) melts containing TICln (n=2,3,4) has been studied at 300∼450K. The cathode surface was covered with a smooth and dense metallic layer which consisted of mainly Al and included Ti. The surface became uneven with the increase in Ti content in the deposit. Intermetallic compounds of Al and Ti were not detected even in the deposit containing Ti more than 10 at%. Electrolysis in TICln (n=2,3,4)-BPC melts has been tested above the melting point of BPC (∼405K). Metallic electrodeposit was not obtained under any condition in these melts.
引用
收藏
页码：500 / 505
相关论文
共 50 条
  • [1] Electroplating of Al-Ti and Ti in room temperature melt
    Takenaka, T
    Kawakami, M
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2001, : 500 - 505
  • [2] Disintegrated melt improves Al-Ti alloys
    不详
    TCE, 2005, (773): : 17 - 17
  • [3] MICROSTRUCTURE AND SOLIDIFICATION ANALYSIS OF MELT-SPUN AL-TI AND AL-TI-B ALLOYS
    CHU, MG
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 (pt 1): : 669 - 675
  • [4] Al-Ti合金
    窦健敏
    稀有金属, 1991, (06) : 471 - 471
  • [5] Al-Ti合金
    铝加工, 2014, (06) : 59 - 59
  • [6] RAPIDLY SOLIDIFIED AL-TI ALLOYS VIA ADVANCED MELT SPINNING
    JHA, SC
    MOZHI, TA
    RAY, R
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1989, 41 (05): : 27 - 30
  • [7] The improvement of melt quality after in-situ precipitation of Al3Ti particles in an Al-Ti alloy
    Srimanosaowapak, S
    O'Reilly, KAQ
    Light Metals and Metal Matrix Composites, 2004, : 283 - 297
  • [8] EFFECT OF HOURING TEMPERATURE ON GRAIN REFINEMENT OF Al-Ti AND Al-Ti-Si ALLOYS.
    Youdelis, W.V.
    Yang, C.V.
    Srinivasan, M.N.
    Aluminium Dusseldorf, 1979, 55 (08): : 533 - 535
  • [9] NUCLEATION OF ALUMINUM BY AL3TI IN THE AL-TI SYSTEM
    KOBAYASHI, KF
    HASHIMOTO, S
    SHINGU, PH
    ZEITSCHRIFT FUR METALLKUNDE, 1983, 74 (11): : 751 - 754
  • [10] ELEVATED-TEMPERATURE AL-TI ALLOY BY MECHANICAL ALLOYING
    MIRCHANDANI, PK
    GOTHARD, DO
    KEMPPINEN, AI
    1989 ADVANCES IN POWDER METALLURGY, VOLS 1-3, 1989, 1-3 : C161 - C173
12345