Microstructures and mechanical properties of (Ti,Cr)Al/Al2O 3 composites fabricated by reactive hot pressing from Ti, Al and Cr2O3

被引：0
|
作者：
机构：
[1] Zhu, Jianfeng
[2] Yang, Wenwen
[3] Wang, Fen
来源：
Zhu, J. (zhujf@sust.edu.cn) | 1600年 / Elsevier Ltd卷 / 567期
关键词：
Titanium aluminide composites reinforced with in situ formed Al 2O3 were fabricated by a reactive hot press method; using Cr2O3; Al and Ti powders as raw materials. The effect of Cr2O3 addition on the microstructures and mechanical properties of the (Ti; Cr)Al/Al2O3 composite was characterized. The results show that the TiAl matrix is refined gradually with increasing the amount of Cr2O3. The Vickers-hardness and densities of the (Ti; Cr)Al/Al2O3 composite increase gradually with increasing Cr2O3 content. When the Cr 2O3 content is 4.47 wt.%; the compressive strength; flexural strength and fracture toughness of the composite reach the maximum values of 1032 MPa; 634 MPa and 9.78 MPa m1/2; which are substantially higher than those of the monolithic TiAl based alloy by about 18%; 78%; and; 80.5%; respectively. The increase in mechanical properties for the (Ti; Cr)Al/Al2O3 composite is due to the toughening effect arising from the combination of Cr solid solution in TiAl matrix and in situ formed Al2O3. © 2013 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [31] Effect of Mn content on the microstructure and mechanical properties of (Ti,Mn)Al/Al2O3 in situ composites prepared by hot pressing
    Wang, Fen
    Zhang, Kun
    Zhu, Jianfeng
    Ye, Lan
    JOURNAL OF MATERIALS RESEARCH, 2013, 28 (12) : 1574 - 1581
  • [32] Effect of Mn content on the microstructure and mechanical properties of (Ti,Mn)Al/Al2O3 in situ composites prepared by hot pressing
    Fen Wang
    Kun Zhang
    Jianfeng Zhu
    Lan Ye
    Journal of Materials Research, 2013, 28 : 1574 - 1581
  • [33] Reactive hot pressing of Al2O3-Ni composites
    Fahrenholtz, WG
    JOURNAL OF MATERIALS SCIENCE, 2003, 38 (14) : 3073 - 3080
  • [34] Reactive hot pressing of Al2O3-Ni composites
    W. G. Fahrenholtz
    Journal of Materials Science, 2003, 38 : 3073 - 3080
  • [35] Combustion synthesis of Al2O3(-Cr2O3)-Cr cermets
    Zeng, XC
    Sun, GX
    Zhang, SG
    SCRIPTA MATERIALIA, 2000, 42 (12) : 1167 - 1172
  • [36] Effect of Cr2O3 addition on microstructural evolution and mechanical properties of Al2O3
    Riu, DH
    Kong, YM
    Kim, HE
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (10) : 1475 - 1481
  • [37] Synthesis and Mechanical Properties of (Ti,V)2AlC/Al2O3 In Situ Solid Solution Composites by Reactive Hot Pressing
    Zhu, Jianfeng
    Han, Na
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (10) : 3285 - 3290
  • [38] Phase Analysis and Mechanical Properties of Ti/Al2O3 Composite Prepared by Hot Pressing
    Feng Shuai
    Wang Zhi
    Shi Guopu
    Ma Yan
    Liu Luhao
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 : 392 - 395
  • [39] Reactive hot pressing and mechanical properties of TiAl3/Ti3AlC2/Al2O3 in situ composite
    Chen, Weiping
    Xiao, Huaqiang
    Fu, Zhiqiang
    Fang, Sicong
    Zhu, Dezhi
    MATERIALS & DESIGN, 2013, 49 : 929 - 934
  • [40] Effects of Nd2O3 on the mechanical properties and oxidation behavior of Ti/Al2O3 composites by vacuum hot pressing sintering
    Liu, Meijia
    Wang, Zhi
    Wu, Junyan
    Li, Qinggang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 648 : 116 - 121
12345