Simulation on microstructure evolution of Al−Si alloy under effect of natural convection during solidification

被引:0
|
作者
WANG Z.-H. [1 ,2 ]
ZHANG L.-T. [1 ]
SU B. [2 ]
ZHANG X.-P. [2 ]
机构
[1] Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi'an
[2] Institute of Materials, China Academy of Engineering Physics, Jiangyou
关键词
Al−Si alloy; natural convection; phase-field simulation; solidification microstructure;
D O I
10.1016/S1003-6326(21)65779-5
中图分类号
学科分类号
摘要
The solidification microstructure of Al−Si alloy was observed in the experiment, the second dendrite arm spacing (SDAS) was measured, and the effect of temperature on the microstructure was analyzed. Phase-field (PF) model incorporating natural convection caused by gravity was employed to simulate the microstructure evolution of Al−Si alloy under the experimental conditions. Good agreements between the experimental and simulation results verified the reliability of the simulation approach proposed in this study. Based on the proposed model, a series of simulation cases (2D and 3D) were performed to investigate the evolution of columnar and equiaxed dendritic structures. It was found that the solute content of the alloy had little impact on the microstructure evolution, while the solute expansion coefficient had obvious effect on the dendrite tip velocities. Significant improvement of computational efficiency was achieved via novel algorithms, making it possible to perform massive simulation for studying the evolution of solidification microstructures, which is hard to be directly observed in experiments via synchrotron radiation for Al−Si alloy. © 2022 The Nonferrous Metals Society of China
引用
收藏
页码:79 / 90
页数:11
相关论文
共 50 条
  • [31] Effect of melt flow on macro- and microstructure evolution during solidification of an Al-4.5% Cu alloy
    Turchin, AN
    Eskin, DG
    Katgerman, L
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 413 : 98 - 104
  • [32] Numerical Simulation of Microstructure Evolution During Alloy Solidification by Using Cellular Automaton Method
    Zhu, Mingfang
    Pan, Shiyan
    Sun, Dongke
    Zhao, Honglei
    ISIJ INTERNATIONAL, 2010, 50 (12) : 1851 - 1858
  • [33] Modeling of microporosity formation and hydrogen concentration evolution during solidification of an Al–Si alloy
    张庆宇
    孙东科
    章顺虎
    王辉
    朱鸣芳
    Chinese Physics B, 2020, 29 (07) : 660 - 668
  • [34] Microstructure of Al–Si–Mg alloy with Zr/Hf additions during solidification and solution treatment
    Hui-Lan Huang
    Zhi-Hong Jia
    Yuan Xing
    Xue-Li Wang
    Qing Liu
    Rare Metals, 2019, 38 : 1033 - 1042
  • [35] MICROSTRUCTURE CHANGES OF AN AL-SI-TI-PB ALLOY DURING ORDINARY AND RAPID SOLIDIFICATION
    TONG, XC
    SHEN, NF
    LIU, BC
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1993, 12 (14) : 1105 - 1107
  • [36] Microstructure evolution of Al-Si-Fe alloy during spray Conform
    Li, Yanfei
    Yin, Jiancheng
    Zhong, Yi
    MATERIALS LETTERS, 2021, 291
  • [37] Microstructure evolution of Al-15% Si alloy during hot rolling
    Wang, Chunxia
    Yu, Fuxiao
    Zhao, Dazhi
    Zhao, Xiang
    Zuo, Liang
    PHILOSOPHICAL MAGAZINE LETTERS, 2018, 98 (10) : 456 - 463
  • [38] Microstructure evolution of a hypereutectic Nb–Ti–Si–Cr–Al–Hf alloy processed by directional solidification
    Ding Fei
    Jia Lina
    Yuan Sainan
    Su Linfen
    Weng Junfei
    Zhang Hu
    Chinese Journal of Aeronautics , 2014, (02) : 438 - 444
  • [39] Microstructure evolution of a hypereutectic Nb–Ti–Si–Cr–Al–Hf alloy processed by directional solidification
    Ding Fei
    Jia Lina
    Yuan Sainan
    Su Linfen
    Weng Junfei
    Zhang Hu
    Chinese Journal of Aeronautics, 2014, 27 (02) : 438 - 444
  • [40] MICROSTRUCTURE EVOLUTION AND PROPERTY CHANGES OF Al-Si-Cu ALLOY BY CONTROLLING DIRECTIONAL SOLIDIFICATION PARAMETERS
    Yi, Xiaojie
    He, Tao
    Huo, Yuanming
    Chen, Shoushuang
    Xu, Yajun
    Sani, Abdou Yahouza Mahamane
    MATERIALI IN TEHNOLOGIJE, 2019, 53 (05): : 739 - 746