CHARACTERIZATION AND ANALYSES ON RESIDUAL STRESS AND DEFORMATION DISTRIBUTION IN LINE HEAT PROCESS

被引：0
|
作者：
Zhou B. [1 ]
Han X. [2 ]
Guo W. [2 ]
Liu Z. [2 ]
Tan S.-K. [3 ]
机构：
[1] School of Naval Architecture and Ocean Engineering, Dalian University of Technology
[2] Maritime Research Centre, Nanyang Technological University
[3] School of Civil and Environmental Engineering, Nanyang Technological University
来源：
Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering | 2016年 / 158卷 / A4期
关键词：
Finite element method - Numerical methods - Ships - Shipyards;
D O I：
10.5750/ijme.v158iA4.1001
中图分类号：
学科分类号：
摘要：
Line heating is an important plate bending process that has been adopted in shipyards for more than 60 years. This paper presents the results of a numerical and experimental study on the residual deformation and stress distribution in the plate forming process using the line heating method. In this paper, a finite element model was used to simulate the heating process, and the model was validated using experimental results. The model was then used to analyze the deformation and stress distributions in the heating and non-heating region. The impact of line heating and sequence of heating on both sides of a steel plate was discussed. The findings of the study show that the compression stress generated help to increase the shrinkage of line heating process. This study presents a valuable reference for similar thermal process. © 2016: The Royal Institution of Naval Architects.
引用
收藏
页码：A315 / A324
页数：9
相关论文
共 50 条
  • [31] COMPONENTS RESIDUAL STRESS AND DEFORMATION REDUCTION: AN INTEGRATED PROCESS DESIGN FOR ADDITIVE MANUFACTURING
    Dalpadulo, Enrico
    Pini, Fabio
    Leali, Francesco
    PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 6, 2021,
  • [32] 3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models
    Eslampanah, Amir Hossein
    Aalami-aleagha, Mohammad Ebrahim
    Feli, Saeid
    Ghaderi, Mohammad Reza
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (01) : 341 - 348
  • [33] Prediction of microstructure, residual stress, and deformation in laser powder bed fusion process
    Yang, Y. P.
    Jamshidinia, M.
    Boulware, P.
    Kelly, S. M.
    COMPUTATIONAL MECHANICS, 2018, 61 (05) : 599 - 615
  • [34] 3-D numerical evaluation of residual stress and deformation due welding process using simplified heat source models
    Amir Hossein Eslampanah
    Mohammad Ebrahim Aalami-aleagha
    Saeid Feli
    Mohammad Reza Ghaderi
    Journal of Mechanical Science and Technology, 2015, 29 : 341 - 348
  • [35] The Effect of Heat Input Parameters on Residual Stress Distribution by Numerical Simulation
    Alhafadhi, Mahmood Hasan
    Krallics, Gyorgy
    5TH INTERNATIONAL CONFERENCE ON COMPETITIVE MATERIALS AND TECHNOLOGY PROCESSES, 2019, 613
  • [36] An analytical prediction model for residual stress distribution and plastic deformation depth in ultrasonic-assisted single ball burnishing process
    Teimouri, Reza
    Liu, Zhanqiang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (1-2): : 127 - 147
  • [37] Analysis of Residual Stress Distribution in Rods after Drawing Process with Regard to Process Variables
    Kuznetsova, E., V
    Kolmogorov, G. L.
    Evsina, A., V
    XXII WINTER SCHOOL ON CONTINUOUS MEDIA MECHANICS (WSCMM 2021), 2021, 1945
  • [38] An analytical prediction model for residual stress distribution and plastic deformation depth in ultrasonic-assisted single ball burnishing process
    Reza Teimouri
    Zhanqiang Liu
    The International Journal of Advanced Manufacturing Technology, 2020, 111 : 127 - 147
  • [39] Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens
    Zhang, Wei
    Wu, Amanda S.
    Sun, Jessica
    Quan, Zhenzhen
    Gu, Bohong
    Sun, Baozhong
    Cotton, Chase
    Heider, Dirk
    Chou, Tsu-Wei
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 150 : 102 - 110
  • [40] Influence of process parameters on residual stress distribution in backward tube spinning
    Duanya Jishu/Forging & Stamping Technology, 1997, 22 (04): : 23 - 25
12345